Interactive training course · 5 days

Pressure Vessels: Inspection, Repair and Integrity

أوعية الضغط: الفحص والإصلاح والسلامة

Next date
1–5 March 2027Paris
Fees from
⁦£2,950⁩per delegate
Formats
Classroom · Online4 sessions
Duration
5 daysCertificate

Overview

Pressure vessels such as separators, drums, columns, reactors and heat exchanger shells contain large amounts of stored energy and hazardous fluids. Their failure can cause explosions, fires, toxic releases and long shutdowns, so they must be designed, inspected, maintained and repaired to recognised codes throughout their life. Corrosion, cracking, creep, hydrogen damage and mechanical damage gradually reduce their integrity, and operators need reliable inspection and assessment methods to decide whether a vessel can continue in service, needs repair or must be replaced.

This course provides a practical understanding of pressure vessel inspection, repair and integrity management. Participants learn the main design principles and codes, vessel components and materials, and the damage mechanisms that affect vessels in oil, gas and petrochemical service. The course covers inspection planning, risk-based inspection, internal and external inspection methods and non-destructive testing techniques, as well as calculation of corrosion rates, remaining life and minimum required thickness. It also explains fitness-for-service assessment, repair and alteration methods, welding repairs and post-weld heat treatment, pressure testing, pressure relief protection, documentation and the integration of vessels into a mechanical integrity programme.

Objectives

  • Explain pressure vessel design principles, components and applicable codes
  • Identify damage mechanisms affecting vessels in oil, gas and petrochemical service
  • Plan inspections using time-based and risk-based approaches
  • Select suitable inspection and non-destructive testing methods
  • Calculate corrosion rates, remaining life and minimum required thickness
  • Apply fitness-for-service assessment and select appropriate repair methods
  • Manage pressure testing, relief protection and integrity documentation

Who should attend

Inspection and integrity engineers, mechanical and maintenance engineers, inspectors, process engineers and supervisors responsible for static equipment.

Training methodology

The course combines explanation of codes and damage mechanisms with worked calculations, real inspection reports, thickness data and repair procedures. Participants calculate minimum thickness, corrosion rates and remaining life, prepare inspection plans for example vessels, select NDT methods for specific damage mechanisms and evaluate repair options. Photographs and samples of corroded and cracked components help participants recognise damage. Fitness-for-service examples show how flaws are assessed. Case studies of vessel failures are analysed in groups to identify causes and lessons. Each day ends with a short quiz and review.

Programme outline

Day1Pressure Vessel Design and Codes
  • Types of pressure vessels in oil, gas and petrochemical plants and their main functions
  • Vessel components: shells, heads, nozzles, flanges, supports, internals and reinforcement
  • Design codes and the principles of design pressure, temperature and allowable stress
  • Materials of construction and the effect of temperature and service on material choice
  • Fabrication, welding, heat treatment and pressure testing carried out during vessel construction
  • Nameplates, data reports and the documents that define a vessel's design basis
  • Practical exercise: calculating the minimum required thickness for a vessel shell and head
Day2Damage Mechanisms
  • General and localised corrosion, pitting and the factors that control corrosion rates
  • Erosion, corrosion under insulation and external corrosion of vessel shells and supports
  • Environmental cracking such as stress corrosion cracking and sulfide stress cracking
  • Hydrogen damage, including blistering, hydrogen-induced cracking and high temperature attack
  • Creep, thermal fatigue and other high-temperature damage in heaters and reactors
  • Mechanical damage, fatigue, brittle fracture and the importance of operating limits
  • Practical exercise: identifying likely damage mechanisms for a set of vessel services
Day3Inspection Planning and Methods
  • Inspection codes and the requirements for internal, external and on-stream inspection
  • Risk-based inspection using probability and consequence to set suitable inspection intervals
  • Visual inspection, internal entry and the preparation of vessels for inspection
  • Ultrasonic thickness measurement and corrosion mapping techniques used on vessel shells and heads
  • Radiography, magnetic particle, dye penetrant and advanced ultrasonic methods for vessel inspection
  • Selecting NDT methods to match each damage mechanism and its location
  • Practical exercise: preparing an inspection plan for a separator in sour service
Day4Assessment and Fitness for Service
  • Calculating corrosion rates, remaining life and the next inspection date
  • Assessing general metal loss, local thin areas and pitting against acceptance criteria
  • Assessment of cracks, laminations, dents and other flaws in vessel components
  • Fitness-for-service principles and the levels of assessment used in practice
  • Re-rating existing vessels safely for new design pressure or temperature conditions
  • Making decisions on continued operation, repair, closer monitoring or replacement of vessels
  • Practical exercise: evaluating thickness data and deciding on continued service
Day5Repair, Testing and Integrity Management
  • Repair and alteration rules and the approval needed before work starts
  • Welding repairs, weld overlays, patches and the need for post-weld heat treatment
  • Pressure testing after repairs and the safety precautions during testing
  • Pressure relief devices, their inspection and their role in protecting vessels
  • Integrity documentation, inspection records and the role of the mechanical integrity programme
  • Group exercise: planning the repair of a vessel with localised corrosion and cracking
  • Final assessment and discussion of vessel integrity issues at participants' plants

Dates and fees

1–5 March 2027March 2027
ParisFrance
Open
⁦£5,950⁩
31 May – 4 June 2027May 2027
OnlineOnline
Open
⁦£2,950⁩
16–20 August 2027August 2027
DammamSaudi Arabia
Open
⁦£4,450⁩
4–8 October 2027October 2027
MuscatOman
Open
⁦£4,450⁩

Fees are in GBP. per delegate.

Certificate

Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.

Frequently asked questions

Will I receive a certificate?
Yes. Every delegate who attends the full programme receives a Harfard Technology certificate of completion.
What is the difference between classroom and online?
The content and trainer are the same. Classroom sessions run in a training venue in the chosen city; online sessions are live with the trainer over the internet.
Can you run this course for our company?
Yes. We deliver the course in-house at your premises or in a city you choose, adapting examples and exercises to your facilities.
How do I register?
Choose a date and click "Register", or send your request from the contact page. Our team will contact you to confirm your seat and send payment details.

Subscribe to our newsletter

New dates and featured courses, once a month.