Interactive training course · 5 days

Valves: Selection, Operation and Maintenance

الصمامات: الاختيار والتشغيل والصيانة

Next date
18–22 January 2027Berlin
Fees from
⁦£2,950⁩per delegate
Formats
Classroom · Online4 sessions
Duration
5 daysCertificate

Overview

Valves are among the most numerous and critical components in oil, gas, refining and petrochemical facilities. They isolate equipment, control flow and pressure, prevent backflow and protect systems from overpressure. A valve that leaks, sticks or fails to close when needed can cause product losses, unplanned shutdowns, environmental releases and serious safety incidents. Selecting the right valve for each service, operating it correctly and maintaining it to a high standard are therefore essential skills for engineers, technicians and operators throughout the plant.

This course provides a practical understanding of industrial valve selection, operation and maintenance. Participants learn the main valve types, including gate, globe, ball, plug, butterfly, check and diaphragm valves, their design features, advantages and limitations, and the codes and standards that govern them. The course covers valve materials, pressure ratings, end connections, trim and seat design, actuators and positioners, and special valves for severe, cryogenic and high-temperature services. It also explains valve testing and leakage classes, common failure modes, packing and seal problems, overhaul procedures, safety and relief valve basics, valve workshops, and maintenance planning for valves in critical service.

Objectives

  • Describe the main valve types and their design features and limitations
  • Select valves for specific services using codes, ratings and materials
  • Understand trim, seat design, actuators and positioners
  • Operate valves correctly and avoid common operating mistakes
  • Identify valve failure modes, leakage problems and their root causes
  • Apply testing, inspection, overhaul and repair procedures
  • Plan maintenance for valves in critical and severe service

Who should attend

Mechanical and maintenance engineers, valve technicians, instrument technicians, operators, inspectors and procurement staff dealing with valves.

Training methodology

The course combines explanation of valve design and standards with cutaway models, photographs, data sheets and real maintenance records. Participants select valves for a range of process services, interpret valve data sheets and specifications, review test certificates and leakage classes, and diagnose valve failures from photographs and case histories. Overhaul and packing procedures are demonstrated step by step. Maintenance records are analysed to identify bad actors and improvement opportunities. Group exercises and case studies reinforce learning, and each day ends with a short quiz and discussion of valve issues at participants' plants.

Programme outline

Day1Valve Functions and Types
  • Functions of valves in process plants: isolation, regulation, non-return and protection
  • Gate and globe valves: design, flow characteristics, uses and common limitations
  • Ball and plug valves: floating and trunnion designs and their typical applications
  • Butterfly valves: concentric, double offset and triple offset designs compared
  • Check valves: swing, lift, dual plate and non-slam designs and their selection
  • Diaphragm, pinch, needle and other special valves used in industrial services
  • Practical exercise: identifying valve types and components using cutaway models and photographs
Day2Valve Selection, Standards and Materials
  • Valve codes and standards and the information they define for buyers and users
  • Pressure classes, pressure-temperature ratings and the main types of valve end connections
  • Body, bonnet and trim materials for corrosive, sour, cryogenic and high-temperature services
  • Seat and seal design, soft seats, metal seats and fire-safe valve requirements
  • Valve data sheets, specifications and the information needed for correct purchasing
  • Fugitive emission requirements and low-emission packing and stem seal designs
  • Practical exercise: selecting valves and materials for a set of process services
Day3Actuators, Operation and Special Services
  • Manual operators, gearboxes and the safe operation of large and stiff valves
  • Pneumatic, hydraulic and electric actuators and the criteria used to select each type
  • Positioners, limit switches and the integration of valves with control systems
  • Emergency shutdown valves and the requirements for partial stroke and full stroke testing
  • Valves for severe service: erosion, cavitation, flashing and high pressure drop
  • Common operating mistakes, such as overtorquing and using valves for the wrong purpose
  • Practical exercise: reviewing actuator sizing and failure positions for shutdown valves
Day4Valve Testing, Failures and Diagnosis
  • Factory and workshop testing: shell tests, seat tests and backseat tests
  • Leakage classes and the acceptance criteria for isolation and control valves
  • Common valve failures: seat leakage, stem leakage, sticking and body erosion
  • Packing problems, gland adjustment and the replacement of stem packing
  • Root cause analysis of repeated valve failures and the identification of bad actors
  • Inspection of valves in service and the use of acoustic and thermal methods
  • Practical exercise: diagnosing valve failures from photographs and maintenance histories
Day5Maintenance, Overhaul and Relief Valves
  • Valve overhaul procedures, including dismantling, inspection, lapping, reassembly and final testing
  • In-line repair, hot tapping and live sealing compounds and their safe use
  • Safety and relief valve basics and the need for regular testing and certification
  • Valve workshops, documentation, tagging and the control of spare parts
  • Maintenance strategies for critical valves and the use of reliability data
  • Group exercise: developing a maintenance plan for valves in a critical process unit
  • Final assessment and discussion of valve issues at participants' own plants

Dates and fees

18–22 January 2027January 2027
BerlinGermany
Open
⁦£5,750⁩
14–18 June 2027June 2027
DammamSaudi Arabia
Open
⁦£4,450⁩
26–30 July 2027July 2027
MuscatOman
Open
⁦£4,450⁩
22–26 November 2027November 2027
OnlineOnline
Open
⁦£2,950⁩

Fees are in GBP. per delegate.

Certificate

Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.

Frequently asked questions

Will I receive a certificate?
Yes. Every delegate who attends the full programme receives a Harfard Technology certificate of completion.
What is the difference between classroom and online?
The content and trainer are the same. Classroom sessions run in a training venue in the chosen city; online sessions are live with the trainer over the internet.
Can you run this course for our company?
Yes. We deliver the course in-house at your premises or in a city you choose, adapting examples and exercises to your facilities.
How do I register?
Choose a date and click "Register", or send your request from the contact page. Our team will contact you to confirm your seat and send payment details.

Subscribe to our newsletter

New dates and featured courses, once a month.