Steam Turbines
التوربينات البخارية
- Next date
- 8–12 March 2027Singapore
- Fees from
- £2,950per delegate
- Formats
- Classroom · Online4 sessions
- Duration
- 5 daysCertificate
Overview
Steam turbines drive generators, compressors, pumps and fans in refineries, petrochemical complexes, gas plants, fertiliser plants and power stations. They are high-value machines that operate at high speeds, pressures and temperatures, and their reliability depends on good steam quality, correct operation, effective protection systems and skilled maintenance. Overspeed, water induction, blade damage, deposits, bearing failures, vibration and control problems can cause long outages, serious damage and safety hazards. Understanding turbine design and behaviour helps engineers and technicians operate these machines safely and keep them running efficiently.
This course provides a practical understanding of steam turbine design, operation, maintenance and troubleshooting. Participants learn steam thermodynamics, turbine principles and the main turbine types, including impulse and reaction, back-pressure, condensing and extraction turbines. The course covers casings, rotors, blades, nozzles, seals, bearings and couplings, governor and control systems, overspeed protection, trip and throttle valves, lube oil and gland steam systems. It also explains start-up, warm-up and shutdown procedures, steam quality and deposit control, performance monitoring, vibration analysis, inspection and overhaul practices, and the troubleshooting of common mechanical and control problems.
Objectives
- Explain steam thermodynamics and the working principles of turbines
- Compare impulse, reaction, back-pressure, condensing and extraction turbines
- Describe turbine components, bearings, seals and auxiliary systems
- Understand governors, control systems and overspeed protection
- Apply safe start-up, warm-up and shutdown procedures
- Monitor performance, steam quality and vibration to detect problems
- Plan inspections and overhauls and troubleshoot common turbine problems
Who should attend
Rotating equipment and mechanical engineers, turbine operators, utilities and power plant staff, maintenance technicians and control engineers.
Training methodology
The course combines explanation of turbine principles with steam tables, Mollier charts, real operating data, vibration reports and overhaul records. Participants calculate steam consumption and efficiency, review start-up curves and protection settings, analyse vibration and performance trends and identify the causes of deposits and blade damage from photographs. Overspeed trip testing and control system checks are walked through step by step. Troubleshooting cases from refinery and power plant turbines are solved in small groups. Each day ends with a short quiz and discussion of turbine issues at participants' plants.
Programme outline
Day1Steam and Turbine Principles
- Applications of steam turbines as drivers for generators, compressors, pumps and fans
- Steam properties, enthalpy, entropy and the use of steam tables and Mollier charts
- Energy conversion in nozzles and blades and the principles of impulse and reaction stages
- Back-pressure, condensing and extraction turbines and their role in plant steam balances
- Turbine efficiency, steam rate and the factors that reduce turbine performance
- Single-stage and multistage turbines and the selection of turbines for different duties
- Practical exercise: calculating steam consumption and efficiency from operating data
Day2Turbine Components and Auxiliary Systems
- Casings, diaphragms, nozzles and blades and the materials used in each component
- Rotors, discs, shafts and couplings and the stresses they experience in service
- Journal and thrust bearings and the monitoring of bearing temperatures and positions
- Labyrinth seals, carbon rings and gland steam systems that control steam leakage
- Lube oil systems, control oil systems, pumps, coolers and filters for turbines
- Condensers, vacuum systems and steam ejectors used with condensing steam turbines in plants
- Practical exercise: tracing steam, lube oil and gland systems on turbine drawings
Day3Control and Protection Systems
- Governor types, speed control and the response of turbines to load changes
- Electronic and mechanical hydraulic control systems and their key components
- Trip and throttle valves, governor valves and the importance of free valve movement
- Overspeed protection, trip devices and the regular testing of overspeed trips
- Protection against water induction, high vibration, low oil pressure and axial displacement
- Extraction and pressure control and the coordination of turbines with plant steam systems
- Practical exercise: reviewing a turbine protection philosophy and test procedure
Day4Operation, Steam Quality and Monitoring
- Start-up procedures, slow roll, warm-up and the control of thermal stresses
- Normal operation, load changes and safe shutdown and coast-down procedures
- Steam purity requirements and the formation of silica, salt and copper deposits
- Water induction risks, drain systems and the protection of turbines from wet steam
- Performance monitoring and the detection of fouling, erosion and seal wear
- Vibration monitoring, critical speeds, rubs and unbalance in steam turbines
- Practical exercise: analysing vibration and performance trends to diagnose a turbine problem
Day5Inspection, Overhaul and Troubleshooting
- Inspection intervals, borescope inspections and the planning of major steam turbine overhauls
- Overhaul tasks: rotor inspection, blade repair, clearance checks and balancing
- Valve and governor overhaul and the testing of control systems after maintenance
- Troubleshooting high vibration, overspeed trips, poor speed control and low efficiency
- Lessons from turbine failures caused by overspeed, water induction and deposits
- Group exercise: troubleshooting a turbine with hunting speed and rising vibration
- Final assessment and discussion of turbine issues at participants' own plants
Dates and fees
Fees are in GBP. per delegate.
Certificate
Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.
Frequently asked questions
Will I receive a certificate?
What is the difference between classroom and online?
Can you run this course for our company?
How do I register?
Related courses
Maintenance, Reliability & Asset IntegrityReliability-Centred Maintenance
15–19 March 2027 · Geneva +4 dates
Maintenance, Reliability & Asset IntegrityRotating Equipment: Pumps & Compressors
21–25 June 2027 · Barcelona +3 dates
Maintenance, Reliability & Asset Integrity