Interactive training course · 5 days

Safe Handling of Nitrogen and Cryogenic Liquids

التعامل الآمن مع النيتروجين والسوائل فائقة البرودة

Next date
Available in-house
Fees from
—per delegate
Formats
In-house training0 sessions
Duration
5 daysCertificate

Overview

Nitrogen is used widely in oil, gas and petrochemical facilities for purging, inerting, blanketing, pressure testing and drying, and it is often supplied as a cryogenic liquid. Because nitrogen is colourless, odourless and non-toxic, people often underestimate it, yet it is one of the leading causes of asphyxiation deaths in industry. A single breath of nitrogen-rich air can cause sudden collapse without warning. Cryogenic liquids such as liquid nitrogen, oxygen, argon and LNG also cause cold burns, brittle fracture of equipment and dangerous pressure build-up when trapped and allowed to warm.

This course provides practical knowledge of the safe use of nitrogen and cryogenic liquids in industrial operations. Participants learn the properties of nitrogen and other inert gases, how oxygen deficiency affects the body, and the typical situations where nitrogen asphyxiation incidents occur. The course covers nitrogen supply systems, purging and inerting operations, confined space entry in inerted equipment, oxygen monitoring and the control of nitrogen release points. It also explains the properties and hazards of cryogenic liquids, storage tanks, vaporisers and transfer equipment, personal protective equipment, pressure relief, material selection, emergency response and lessons from nitrogen and cryogenic incidents.

Objectives

  • Explain the properties of nitrogen and other inert gases
  • Describe how oxygen deficiency affects the body and causes asphyxiation
  • Identify typical situations that lead to nitrogen asphyxiation incidents
  • Apply safe practices for purging, inerting and entry into inerted equipment
  • Use oxygen monitoring and control nitrogen release points effectively
  • Handle, store and transfer cryogenic liquids safely
  • Respond to nitrogen and cryogenic emergencies and apply lessons learned

Who should attend

Operators, maintenance and commissioning staff, supervisors, permit issuers, HSE officers and contractors who use nitrogen or handle cryogenic liquids.

Training methodology

The course combines explanation of gas properties and physiology with practical exercises using real nitrogen system drawings, permits, oxygen monitors and cryogenic equipment data. Participants calculate oxygen depletion from nitrogen releases, identify nitrogen hazards on plant layouts, plan safe purging operations and review entry procedures for inerted vessels. Cryogenic PPE and equipment are examined where available. Videos and case studies of nitrogen asphyxiation and cryogenic incidents are analysed to identify causes and preventive measures. Each day ends with a short quiz and discussion of practices at participants' sites.

Programme outline

Day1Nitrogen and Inert Gases
  • Uses of nitrogen in oil, gas and petrochemical plants: purging, blanketing, testing and drying
  • Properties of nitrogen, argon, carbon dioxide and other inert gases used in industry
  • Nitrogen supply methods: cylinders, bulk liquid, on-site generation and pipeline networks
  • Composition of air and why small changes in oxygen level are so dangerous
  • How oxygen deficiency affects the brain and body and why victims have no warning
  • Statistics and patterns of nitrogen asphyxiation incidents in industry worldwide
  • Practical exercise: calculating oxygen levels after nitrogen release into a closed space
Day2Nitrogen Hazards in Plant Operations
  • Typical scenarios: entry into inerted vessels, open manways, vents and purge outlets
  • Nitrogen in confined spaces, pits, trenches and poorly ventilated buildings
  • Wrong hose connections, cross-contamination and nitrogen entering breathing air systems by mistake
  • Purging and inerting operations and the safe control of vent and discharge points
  • Nitrogen use during commissioning, catalyst handling and other turnaround activities in process units
  • Signs, labelling and barriers to warn people of nitrogen-enriched areas
  • Practical exercise: identifying nitrogen hazards on a plant layout during a turnaround
Day3Monitoring, Permits and Entry into Inerted Equipment
  • Oxygen monitors: personal, portable and fixed detectors and their calibration
  • Alarm settings, bump testing and the response to low oxygen alarms
  • Work permits and isolation requirements for work near nitrogen systems
  • Entry into inert atmospheres: when it is necessary and the special controls required
  • Supplied air breathing apparatus, reliable communication and standby rescue arrangements during entry
  • Rescue from nitrogen-filled spaces and why untrained rescuers often become victims
  • Practical exercise: reviewing a permit and procedure for entry into an inerted reactor
Day4Cryogenic Liquids
  • Properties of cryogenic liquids: liquid nitrogen, oxygen, argon, carbon dioxide and LNG
  • Expansion ratios and the danger of pressure build-up in trapped cryogenic liquids
  • Cold burns, frostbite and the effect of extreme cold on skin and eyes
  • Brittle fracture of carbon steel and the selection of materials for cryogenic service
  • Oxygen enrichment from liquid air and liquid oxygen and its fire hazards
  • Cryogenic storage tanks, vaporisers, transfer hoses and pressure relief devices
  • Practical exercise: calculating gas volumes from vaporised cryogenic liquid releases
Day5Safe Handling, PPE and Emergency Response
  • Safe filling, transfer and decanting of cryogenic liquids from tanks and dewars
  • Personal protective equipment for cryogenic work: gloves, face shields and clothing
  • Delivery, unloading and the safe positioning of tankers and storage vessels
  • Emergency response to nitrogen releases, cryogenic spills and people collapsing
  • First aid for asphyxiation and cold burns and coordination with medical services
  • Group exercise: investigating a nitrogen asphyxiation incident and identifying failed barriers
  • Final assessment and discussion of nitrogen and cryogenic practices at participants' sites

Dates and fees

There are no scheduled dates for this course at the moment. Request it as in-house training, or ask us about the next date.

Certificate

Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.

Frequently asked questions

Will I receive a certificate?
Yes. Every delegate who attends the full programme receives a Harfard Technology certificate of completion.
What is the difference between classroom and online?
The content and trainer are the same. Classroom sessions run in a training venue in the chosen city; online sessions are live with the trainer over the internet.
Can you run this course for our company?
Yes. We deliver the course in-house at your premises or in a city you choose, adapting examples and exercises to your facilities.
How do I register?
Choose a date and click "Register", or send your request from the contact page. Our team will contact you to confirm your seat and send payment details.

Subscribe to our newsletter

New dates and featured courses, once a month.