Interactive training course · 5 days

Positive Displacement Pumps

مضخات الإزاحة الموجبة

Next date
22–26 March 2027Online
Fees from
⁦£2,950⁩per delegate
Formats
Online · Classroom4 sessions
Duration
5 daysCertificate

Overview

Positive displacement pumps, including reciprocating, plunger, diaphragm, gear, screw, lobe and progressive cavity pumps, are used wherever high pressures, precise metering or viscous and difficult fluids must be handled. In oil, gas and petrochemical facilities they inject chemicals, transfer crude and heavy oils, feed boilers, pump glycol and amine and handle slurries and multiphase fluids. Because they deliver a fixed volume per stroke or revolution, they behave very differently from centrifugal pumps, and incorrect operation can quickly cause overpressure, pulsation damage and costly failures.

This course provides a practical understanding of the selection, operation and maintenance of positive displacement pumps. Participants learn the principles of positive displacement pumping, the main pump types and their applications, and how they differ from centrifugal pumps in performance and control. The course covers capacity, pressure, power and NPSH calculations, flow control and metering accuracy, relief protection, pulsation and the use of dampeners. It also explains seals, packing and diaphragm systems, valves and check valves, lubrication, condition monitoring, overhaul and repair practices, and the troubleshooting of common problems such as low flow, cavitation, leakage, pulsation and excessive wear.

Objectives

  • Explain positive displacement pumping principles and performance
  • Compare reciprocating and rotary pump types and their applications
  • Calculate capacity, pressure, power and NPSH requirements
  • Apply flow control, metering accuracy and relief protection correctly
  • Manage pulsation using dampeners and good piping design
  • Maintain seals, packing, diaphragms, valves and drive components
  • Troubleshoot low flow, cavitation, leakage, pulsation and wear problems

Who should attend

Rotating equipment engineers, mechanical technicians, operators, chemical injection specialists and maintenance supervisors.

Training methodology

The course combines explanation of pump principles with real data sheets, performance curves, maintenance records and photographs of failed components. Participants calculate capacity, power and NPSH requirements, select pump types for different fluids and duties, size relief valves and pulsation dampeners and prepare maintenance checklists. Failed valves, plungers, diaphragms and rotors are examined through images to identify causes. Troubleshooting cases from chemical injection, crude transfer and boiler feed services are solved in small groups. Each day ends with a short quiz and discussion of pump issues at participants' sites.

Programme outline

Day1Positive Displacement Pumping Principles
  • How positive displacement pumps work and why they behave differently from centrifugal pumps
  • Applications in chemical injection, crude transfer, boiler feed, glycol and slurry services
  • Pump curves, slip, volumetric efficiency and the effect of viscosity on performance
  • Capacity, pressure and power calculations for reciprocating and rotary pumps
  • Net positive suction head requirements and acceleration head in reciprocating pumps
  • Overpressure risks and the need for relief valves on every positive displacement pump
  • Practical exercise: calculating capacity, power and NPSH for a plunger pump installation
Day2Reciprocating, Plunger and Diaphragm Pumps
  • Piston and plunger pumps, their liquid ends, power ends and typical pressure ranges
  • Diaphragm and metering pumps for accurate chemical injection and hazardous fluids
  • Suction and discharge valves, their designs and the common causes of valve failure
  • Plunger packing, lubrication and the control of leakage from stuffing boxes
  • Stroke adjustment, speed control and the calibration of metering pump flow rates
  • Pulsation, dampeners and the design of suction and discharge piping
  • Practical exercise: sizing a pulsation dampener and relief valve for a metering pump
Day3Rotary Positive Displacement Pumps
  • Gear pumps, external and internal designs and their use for lubricants and viscous fluids
  • Screw pumps, twin and triple screw designs for crude oil and multiphase duties
  • Progressive cavity pumps for viscous fluids, slurries and produced water services
  • Lobe and vane pumps and their applications in transfer and loading services
  • Clearances, wear and the effect of solids and viscosity on rotary pump life
  • Mechanical seals and packing arrangements for rotary pumps and their support systems
  • Practical exercise: selecting pump types for a range of fluids and operating duties
Day4Operation, Control and Condition Monitoring
  • Safe start-up and shutdown of positive displacement pumps and checks before starting
  • Flow control methods, including speed variation, stroke adjustment and bypass control
  • Running dry, blocked discharge and other operating errors and how to prevent them
  • Condition monitoring with vibration, pressure pulsation, temperature and flow measurements
  • Monitoring metering accuracy and daily chemical consumption in chemical injection systems
  • Integration of pumps with control systems, safety interlocks and protection devices
  • Practical exercise: interpreting operating data to identify abnormal pump behaviour
Day5Maintenance and Troubleshooting
  • Preventive maintenance tasks and intervals for reciprocating and rotary pumps
  • Overhaul procedures, inspection of valves, plungers, rotors, stators and bearings
  • Diaphragm replacement, leak detection and maintenance of hydraulic diaphragm pumps
  • Troubleshooting low flow, noisy operation, cavitation, leakage and high power use
  • Root cause analysis of repeated failures and the selection of improved materials
  • Group exercise: troubleshooting a chemical injection pump with inaccurate dosing
  • Final assessment and discussion of pump issues at participants' own sites

Dates and fees

22–26 March 2027March 2027
OnlineOnline
Open
⁦£2,950⁩
7–11 June 2027June 2027
IstanbulTurkey
Open
⁦£4,500⁩
12–16 July 2027July 2027
DubaiUnited Arab Emirates
Open
⁦£4,950⁩
20–24 December 2027December 2027
DohaQatar
Open
⁦£4,450⁩

Fees are in GBP. per delegate.

Certificate

Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.

Frequently asked questions

Will I receive a certificate?
Yes. Every delegate who attends the full programme receives a Harfard Technology certificate of completion.
What is the difference between classroom and online?
The content and trainer are the same. Classroom sessions run in a training venue in the chosen city; online sessions are live with the trainer over the internet.
Can you run this course for our company?
Yes. We deliver the course in-house at your premises or in a city you choose, adapting examples and exercises to your facilities.
How do I register?
Choose a date and click "Register", or send your request from the contact page. Our team will contact you to confirm your seat and send payment details.

Subscribe to our newsletter

New dates and featured courses, once a month.