Mechanical Seals: Selection, Installation and Troubleshooting
موانع التسرب الميكانيكية: الاختيار والتركيب وحل المشكلات
- Next date
- 4–8 January 2027Muscat
- Fees from
- £2,950per delegate
- Formats
- Classroom · Online4 sessions
- Duration
- 5 daysCertificate
Overview
Mechanical seals are the most common cause of pump failures in refineries, gas plants and petrochemical facilities, and seal leaks are a frequent source of fires, toxic releases, environmental emissions and lost production. A seal works with a very thin fluid film between precisely finished faces, so it is highly sensitive to the way it is selected, installed, supported and operated. Many repeated seal failures are not caused by the seal itself, but by wrong seal plans, poor installation, dry running, pump problems or process upsets that destroy the delicate sealing interface.
This course provides a practical understanding of mechanical seal selection, installation and troubleshooting. Participants learn sealing principles, seal components and face materials, and the main seal types and arrangements, including single, dual pressurised and dual unpressurised seals, cartridge and component seals, and gas seals. The course covers seal selection using industry standards, seal flush and support system plans, barrier and buffer fluids, and seal environment control. It also explains correct installation and commissioning, operating practices, condition monitoring, failure analysis using face and component damage patterns, and practical methods to improve seal reliability and extend mean time between failures.
Objectives
- Explain sealing principles, fluid films and the main seal components
- Compare seal types, arrangements and face and elastomer materials
- Select seals and support system plans using industry standards
- Specify barrier and buffer fluids and control the seal environment
- Install, commission and operate mechanical seals correctly
- Analyse seal failures using face and component damage patterns
- Improve seal reliability and extend the time between failures
Who should attend
Rotating equipment engineers, mechanical technicians, pump specialists, reliability engineers, operators and maintenance supervisors.
Training methodology
The course combines explanation of sealing principles with cutaway seals, seal drawings, support system schematics and real failure samples or photographs. Participants select seal types and support plans for typical pump services, review piping plan diagrams, prepare installation checklists and analyse failed seal faces and components to identify root causes. Seal failure histories from plant maintenance systems are analysed to find bad actors and improvement opportunities. Demonstrations of correct installation steps are included where available. Each day ends with a short quiz and discussion of seal issues at participants' plants.
Programme outline
Day1Sealing Principles and Seal Components
- Why mechanical seals fail so often and their impact on safety, emissions and production
- Sealing principles, fluid film formation and the balance between leakage and face wear
- Seal components: primary and mating rings, secondary seals, springs, bellows and drive mechanisms
- Face materials such as carbon, silicon carbide and tungsten carbide and their combinations
- Elastomers and secondary seal materials and their compatibility with process fluids
- Balanced and unbalanced seals and the effect of pressure on face loading
- Practical exercise: identifying seal components using cutaway seals and drawings
Day2Seal Types, Arrangements and Selection
- Pusher and non-pusher seals and the advantages of metal bellows seals
- Cartridge and component seals and why cartridge designs reduce installation errors
- Single, dual unpressurised and dual pressurised arrangements and when to use each
- Dry gas seals for pumps and compressors and their special requirements
- Seal selection using industry standards based on fluid, pressure, temperature and hazard
- Seal selection for difficult services: light hydrocarbons, hot oils, slurries and toxic fluids
- Practical exercise: selecting seal types and arrangements for a range of pump services
Day3Seal Support Systems and Environment Control
- The purpose of seal flush and support systems and their effect on seal reliability
- Common piping plans for flushing, cooling, quenching and heating seal chambers
- Barrier and buffer fluid systems, reservoirs, pressurisation and level monitoring
- Vapour pressure margin and the prevention of flashing at seal faces
- Seal chamber design, throat bushings and the control of solids and temperature
- Instrumentation and alarms for seal support systems and their regular checking
- Practical exercise: reviewing seal support plans for a light hydrocarbon pump
Day4Installation, Commissioning and Operation
- Pump condition checks before seal installation: runout, endplay, squareness and alignment
- Correct step-by-step installation procedures for cartridge seals and component seals on pumps
- Setting, centring and locking cartridge seals and removing setting devices
- Venting, filling and commissioning seal support systems correctly before the pump is started
- Operating practices that protect seals: avoiding dry running, cavitation and low flow
- Condition monitoring of seals using leakage, temperatures and support system data
- Practical exercise: preparing an installation and commissioning checklist for a dual seal
Day5Failure Analysis and Reliability Improvement
- Systematic seal failure analysis and the collection of evidence before dismantling
- Face damage patterns: heat checking, blistering, chipping, wear tracks and coking
- Elastomer, spring and hardware damage and what they reveal about failure causes
- Pump and process causes of seal failures, including vibration and operating upsets
- Seal reliability programmes, bad actor management and improving mean time between failures
- Group exercise: analysing a repeated seal failure history and recommending improvements
- Final assessment and discussion of seal issues at participants' own plants
Dates and fees
Fees are in GBP. per delegate.
Certificate
Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.
Frequently asked questions
Will I receive a certificate?
What is the difference between classroom and online?
Can you run this course for our company?
How do I register?
Related courses
Maintenance, Reliability & Asset IntegrityReliability-Centred Maintenance
15–19 March 2027 · Geneva +4 dates
Maintenance, Reliability & Asset IntegrityRotating Equipment: Pumps & Compressors
21–25 June 2027 · Barcelona +3 dates
Maintenance, Reliability & Asset Integrity