Machinery Lubrication
تزييت الآلات
- Next date
- 29 March – 2 April 2027Kuwait City
- Fees from
- £2,950per delegate
- Formats
- Classroom · Online4 sessions
- Duration
- 5 daysCertificate
Overview
Lubrication is one of the simplest and most effective ways to improve machine reliability, yet poor lubrication practices remain a leading cause of bearing, gear and compressor failures in oil, gas and industrial plants. Using the wrong lubricant, adding too much or too little, allowing contamination by water and dirt, and mixing incompatible products all shorten equipment life. A well-managed lubrication programme reduces failures, energy use and maintenance costs, and supports condition monitoring by providing early warning of wear and contamination before serious damage occurs.
This course provides a practical understanding of machinery lubrication and the management of lubrication programmes. Participants learn the principles of friction, wear and lubrication regimes, the properties of lubricating oils and greases, base oils and additives, and how to select lubricants for pumps, compressors, turbines, gearboxes and motors. The course covers lubrication methods and systems, correct grease quantities and intervals, oil mist and circulating systems, storage and handling, contamination control and filtration. It also explains oil sampling and analysis, interpretation of results, lubricant consolidation, lubrication routes and records, safety and environmental aspects, and how to build an effective lubrication programme.
Objectives
- Explain friction, wear and lubrication regimes in machinery
- Describe the properties of oils, greases, base oils and additives
- Select suitable lubricants for pumps, compressors, turbines and gearboxes
- Apply correct lubrication methods, quantities and intervals
- Store, handle and protect lubricants from contamination
- Take oil samples and interpret oil analysis results correctly
- Build and manage an effective lubrication programme for a plant
Who should attend
Lubrication technicians, mechanical technicians, maintenance supervisors, reliability engineers, operators and storekeepers handling lubricants.
Training methodology
The course combines explanation of lubrication science with practical exercises using lubricant data sheets, machine manuals, oil analysis reports and real lubrication schedules. Participants select lubricants for typical machines, calculate grease quantities and relubrication intervals, review storage and handling arrangements, and interpret oil analysis results to recommend actions. Demonstrations show correct sampling methods and contamination control tools where available. Case studies of bearing and gearbox failures caused by poor lubrication are analysed in groups. Each day ends with a short quiz and discussion of lubrication practices at participants' plants.
Programme outline
Day1Lubrication Fundamentals
- Why lubrication matters and how poor practices cause a large share of machine failures
- Friction and wear mechanisms such as adhesion, abrasion, fatigue and corrosion in machines
- Lubrication regimes, including boundary, mixed, hydrodynamic and elastohydrodynamic lubrication, explained with examples
- Viscosity, viscosity index and the effect of temperature on lubricant film thickness
- Mineral and synthetic base oils and their advantages in different operating conditions
- Additives such as antioxidants, anti-wear, extreme pressure and anti-foam agents
- Practical exercise: reading lubricant data sheets and comparing key properties
Day2Oils, Greases and Lubricant Selection
- Grease composition, thickeners, consistency grades and compatibility between grease types
- Selecting lubricants for pumps, electric motors and general rolling element bearings
- Lubricants for compressors, steam and gas turbines and their special requirements
- Gear oils for enclosed and open gears and the selection of the correct viscosity grade
- Lubricant consolidation to reduce the number of products and the risk of mix-ups
- Manufacturer recommendations and when it is reasonable to choose alternatives
- Practical exercise: selecting lubricants for a set of machines in a process plant
Day3Lubrication Methods and Systems
- Manual greasing, grease guns, quantities, intervals and the danger of over-greasing
- Automatic lubricators and single point and centralised grease systems for many lubrication points
- Oil bath, splash, ring oiling and constant level oilers in pumps and gearboxes
- Circulating oil systems, lube oil consoles and their filters, coolers and pumps
- Oil mist lubrication systems and their benefits for large numbers of pumps
- Lubrication routes, labelling, colour coding and the recording of lubrication tasks
- Practical exercise: calculating grease quantities and relubrication intervals for bearings
Day4Storage, Handling and Contamination Control
- Lubricant storage rooms, drum handling and the prevention of water and dirt entry
- Labelling, dedicated transfer containers and the avoidance of cross-contamination between different lubricants
- Contamination sources such as dust, water, process fluids and wear debris
- Cleanliness targets, filtration, breathers and the removal of water from oil
- Oil sampling methods, sampling points and the importance of representative samples
- Safety, health and environmental aspects of handling and disposing of used lubricants
- Practical exercise: auditing a lubricant store and recommending practical improvements to current practices
Day5Oil Analysis and Lubrication Programmes
- Oil analysis tests for viscosity, oxidation, water, particle count and wear metals
- Interpreting oil analysis reports and setting alarm limits for key parameters
- Linking oil analysis with vibration and other condition monitoring techniques
- Building a lubrication programme with procedures, routes, skills and performance measures
- Lessons from bearing, gearbox and compressor failures caused by poor lubrication
- Group exercise: interpreting a set of oil analysis reports and planning corrective actions
- Final assessment and discussion of lubrication practices at participants' own plants
Dates and fees
Fees are in GBP. per delegate.
Certificate
Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.
Frequently asked questions
Will I receive a certificate?
What is the difference between classroom and online?
Can you run this course for our company?
How do I register?
Related courses
Maintenance, Reliability & Asset IntegrityReliability-Centred Maintenance
15–19 March 2027 · Geneva +4 dates
Maintenance, Reliability & Asset IntegrityRotating Equipment: Pumps & Compressors
21–25 June 2027 · Barcelona +3 dates
Maintenance, Reliability & Asset Integrity