Interactive training course · 5 days

HVAC Systems: Operation and Maintenance

أنظمة التدفئة والتهوية والتكييف: التشغيل والصيانة

Next date
8–12 February 2027Dubai
Fees from
⁦£2,950⁩per delegate
Formats
Classroom · Online4 sessions
Duration
5 daysCertificate

Overview

Heating, ventilation and air conditioning systems keep control rooms, substations, laboratories, offices, accommodation and process buildings safe and comfortable in oil, gas and industrial facilities. In hot climates such as the Gulf region they are essential for protecting people and sensitive electronic equipment, and in hazardous areas they also maintain building pressurisation to keep flammable gases out. HVAC failures can cause equipment trips, control system faults, poor working conditions and health problems, while poorly maintained systems waste large amounts of energy.

This course provides a practical understanding of the operation and maintenance of HVAC systems in industrial facilities. Participants learn the principles of heat transfer, psychrometrics and the refrigeration cycle, and the main system types, including split units, packaged units, chillers, air handling units and fan coil units. The course covers compressors, condensers, evaporators, expansion devices and refrigerants, ductwork and air distribution, controls and building management systems. It also explains pressurisation of buildings in hazardous areas, gas detection interlocks, filtration and indoor air quality, preventive maintenance, refrigerant handling and safety, energy efficiency and the troubleshooting of common HVAC problems.

Objectives

  • Explain heat transfer, psychrometrics and the refrigeration cycle
  • Describe split units, packaged units, chillers, AHUs and fan coil units
  • Understand compressors, condensers, evaporators, expansion devices and refrigerants
  • Operate HVAC controls and building management systems effectively
  • Maintain building pressurisation and gas detection interlocks in hazardous areas
  • Carry out preventive maintenance and handle refrigerants safely
  • Improve energy efficiency and troubleshoot common HVAC problems

Who should attend

HVAC technicians, facility and utilities engineers, maintenance supervisors, electrical and instrument technicians and building managers.

Training methodology

The course combines explanation of HVAC principles with system drawings, psychrometric charts, equipment data sheets, building management system screens and maintenance records. Participants calculate cooling loads, plot air conditions on psychrometric charts, trace refrigerant circuits, review pressurisation and gas detection arrangements for control buildings and prepare preventive maintenance checklists. Refrigerant pressure and temperature readings are interpreted to diagnose faults. Case studies of control room overheating and HVAC failures in hazardous areas are analysed in groups. Each day ends with a short quiz and discussion.

Programme outline

Day1HVAC Principles
  • The role of HVAC in control rooms, substations, laboratories and accommodation buildings
  • Heat transfer, sensible and latent heat and the main sources of building heat loads
  • Psychrometrics: temperature, humidity, dew point and the use of psychrometric charts
  • Cooling load estimation for control rooms and equipment rooms in hot climates
  • Indoor air quality, ventilation rates and the comfort and health of occupants
  • Design conditions, redundancy and the reliability needs of critical buildings
  • Practical exercise: estimating the cooling load for a control room in a hot climate
Day2Refrigeration Cycle and Components
  • The vapour compression refrigeration cycle and how it appears on a pressure-enthalpy diagram
  • Compressors used in HVAC: reciprocating, scroll, screw and centrifugal types
  • Condensers, evaporators, expansion valves and their effect on system performance
  • Refrigerants, environmental regulations and the phase-out of high impact refrigerants
  • Superheat, subcooling and the use of pressure and temperature readings in diagnosis
  • Refrigerant leaks, charging, recovery and the safety precautions for refrigerant work
  • Practical exercise: interpreting refrigerant readings to identify common circuit faults
Day3HVAC Systems and Air Distribution
  • Split units, packaged units and rooftop units and their typical applications
  • Chilled water systems, chillers, cooling towers and chilled water pumps
  • Air handling units, fan coil units, filters, coils and humidity control
  • Ductwork, dampers, diffusers and the balancing of air distribution systems
  • HVAC controls, thermostats, sensors and the building management systems that supervise them
  • Redundant HVAC arrangements that protect control rooms and electrical substations from overheating
  • Practical exercise: tracing air and chilled water flows on HVAC system drawings
Day4HVAC in Hazardous Areas and Safety
  • Pressurisation of buildings in hazardous areas and the prevention of gas ingress
  • Gas detection at air intakes and interlocks that shut down or isolate HVAC systems
  • Smoke control, fire dampers and the integration of HVAC with fire systems
  • Toxic gas protection, shelter-in-place arrangements and HVAC response during site emergencies
  • Electrical safety, rotating parts and working at height during HVAC maintenance
  • Legionella risks in cooling towers and water systems and their control
  • Practical exercise: reviewing pressurisation and gas detection for a control building
Day5Maintenance, Energy and Troubleshooting
  • Preventive maintenance tasks for filters, coils, fans, belts, compressors and controls
  • Coil cleaning, condensate drains and the prevention of microbial growth
  • Energy efficiency measures, set point optimisation and variable speed drives
  • Troubleshooting insufficient cooling, high humidity, noise, icing and frequent trips
  • Maintenance records, performance monitoring and the planning of HVAC equipment replacements
  • Group exercise: troubleshooting an overheating control room HVAC system using real data
  • Final assessment and discussion of HVAC issues at participants' own facilities

Dates and fees

8–12 February 2027February 2027
DubaiUnited Arab Emirates
Open
⁦£4,950⁩
5–9 April 2027April 2027
OnlineOnline
Open
⁦£2,950⁩
6–10 September 2027September 2027
MuscatOman
Open
⁦£4,450⁩
22–26 November 2027November 2027
DammamSaudi Arabia
Open
⁦£4,450⁩

Fees are in GBP. per delegate.

Certificate

Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.

Frequently asked questions

Will I receive a certificate?
Yes. Every delegate who attends the full programme receives a Harfard Technology certificate of completion.
What is the difference between classroom and online?
The content and trainer are the same. Classroom sessions run in a training venue in the chosen city; online sessions are live with the trainer over the internet.
Can you run this course for our company?
Yes. We deliver the course in-house at your premises or in a city you choose, adapting examples and exercises to your facilities.
How do I register?
Choose a date and click "Register", or send your request from the contact page. Our team will contact you to confirm your seat and send payment details.

Subscribe to our newsletter

New dates and featured courses, once a month.