Interactive training course · 5 days

Gas Turbines: Operation and Maintenance

التوربينات الغازية: التشغيل والصيانة

Next date
Available in-house
Fees from
—per delegate
Formats
In-house training0 sessions
Duration
5 daysCertificate

Overview

Gas turbines drive compressors, pumps and generators across oil and gas production, pipelines, LNG and power plants, and an unplanned trip can stop an entire facility. Keeping them available depends on operators and maintenance staff who understand how the machine works, what limits its performance and how problems show up long before a failure. This course covers industrial and aero-derivative gas turbines from first principles to maintenance practice. Participants learn the Brayton cycle, the function of compressors, combustors and turbine sections, and the auxiliary systems for fuel, lube oil, air intake and control. The course explains performance monitoring, the effects of ambient temperature and fouling, compressor washing, borescope inspection and hot section life. Common problems such as vibration, combustion dynamics, high exhaust temperature spread and trips are examined through real cases, together with maintenance planning and overhaul strategies.

Objectives

  • Explain the Brayton cycle and gas turbine performance parameters
  • Describe the main sections and auxiliary systems of a gas turbine
  • Monitor performance and recognise degradation
  • Apply compressor washing, inlet filtration and fuel quality practices
  • Plan borescope inspections and hot section maintenance
  • Troubleshoot vibration, combustion and control problems

Who should attend

Rotating equipment and maintenance engineers, gas turbine operators and technicians, reliability engineers and supervisors in oil and gas, LNG and power facilities.

Training methodology

Cutaway drawings, animations and borescope videos are used to explain each section of the machine. Participants calculate performance corrections for ambient conditions and estimate the benefit of compressor washing from operating data. Trend data from turbine trips and vibration events are analysed in groups to find root causes. Overhaul reports are reviewed to show typical hot section damage, and every day ends with a short quiz or troubleshooting case. Participants are encouraged to bring examples from their own plants.

Programme outline

Day1Gas Turbine Fundamentals
  • Applications in oil, gas and power
  • Industrial and aero-derivative turbines
  • The Brayton cycle
  • Single-shaft and two-shaft designs
  • Performance parameters: output, heat rate, efficiency
  • Effect of ambient conditions
  • Practical exercise: performance correction
Day2Main Sections
  • Air intake and filtration
  • Axial compressor and surge
  • Combustion systems and DLN combustors
  • Turbine section and blade cooling
  • Exhaust and heat recovery
  • Materials and coatings
  • Video session: inside the turbine
Day3Auxiliary and Control Systems
  • Fuel gas and liquid fuel systems
  • Lube oil and seal systems
  • Starting systems
  • Control and protection systems
  • Vibration and temperature monitoring
  • Fire and gas protection in the enclosure
  • Practical exercise: reading a trip sequence
Day4Performance and Condition Monitoring
  • Performance degradation: recoverable and non-recoverable
  • Online and offline compressor washing
  • Exhaust temperature spread
  • Vibration analysis on gas turbines
  • Borescope inspection
  • Practical exercise: estimating wash benefits
  • Case study: combustion dynamics problem
Day5Maintenance and Troubleshooting
  • Inspection intervals: combustion, hot gas path, major
  • Equivalent operating hours and starts
  • Hot section life management
  • Overhaul planning
  • Common trips and their causes
  • Team exercise: troubleshooting cases
  • Final assessment

Dates and fees

There are no scheduled dates for this course at the moment. Request it as in-house training, or ask us about the next date.

Certificate

Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.

Frequently asked questions

Will I receive a certificate?
Yes. Every delegate who attends the full programme receives a Harfard Technology certificate of completion.
What is the difference between classroom and online?
The content and trainer are the same. Classroom sessions run in a training venue in the chosen city; online sessions are live with the trainer over the internet.
Can you run this course for our company?
Yes. We deliver the course in-house at your premises or in a city you choose, adapting examples and exercises to your facilities.
How do I register?
Choose a date and click "Register", or send your request from the contact page. Our team will contact you to confirm your seat and send payment details.

Subscribe to our newsletter

New dates and featured courses, once a month.