Fans and Blowers
المراوح والنافخات
- Next date
- 15–19 March 2027Kuala Lumpur
- Fees from
- £2,950per delegate
- Formats
- Classroom · Online4 sessions
- Duration
- 5 daysCertificate
Overview
Fans and blowers move large volumes of air and gas in furnaces, boilers, cooling towers, air coolers, flare systems, sulfur recovery units, ventilation systems and process plants. Forced and induced draft fans are critical for safe combustion, while blowers supply air to oxidisers, aeration basins and process reactions. Fan failures can cause unit trips, unsafe furnace conditions and high energy losses. Problems such as unbalance, misalignment, bearing failure, erosion, corrosion, fouling and poor control are common, and many fans run far from their best efficiency point, wasting large amounts of energy.
This course provides a practical understanding of the operation, maintenance and troubleshooting of industrial fans and blowers. Participants learn fan laws, performance curves, system resistance and the interaction between fans and ductwork, and the main fan and blower types, including centrifugal, axial, positive displacement and multistage centrifugal blowers. The course covers flow control methods such as dampers, inlet vanes and variable speed drives, fan selection and energy efficiency. It also explains bearings, lubrication, belts and couplings, balancing and alignment, vibration analysis, erosion and corrosion protection, inspection and overhaul procedures, safety during fan maintenance and the troubleshooting of common problems.
Objectives
- Apply fan laws and interpret fan performance and system curves
- Describe centrifugal, axial and positive displacement fans and blowers
- Select flow control methods and improve fan energy efficiency
- Maintain bearings, lubrication, belts and couplings correctly
- Balance and align fans and analyse vibration to detect faults
- Inspect and protect fans against erosion, corrosion and fouling
- Maintain fans safely and troubleshoot common operating problems
Who should attend
Rotating equipment engineers, mechanical technicians, maintenance supervisors, energy engineers and operators of furnaces, boilers and cooling systems.
Training methodology
The course combines explanation of fan principles with real performance curves, field data, vibration reports and maintenance records. Participants apply fan laws to predict performance changes, plot operating points against system curves, compare damper and speed control energy use, and analyse vibration data to identify unbalance, looseness and bearing faults. Balancing and alignment procedures are demonstrated step by step. Photographs of eroded and corroded impellers help participants recognise damage. Troubleshooting cases from furnace draft fans, cooling tower fans and blowers are solved in groups. Each day ends with a short quiz.
Programme outline
Day1Fan Principles and Performance
- Applications of fans and blowers in furnaces, boilers, cooling towers, air coolers and process units
- Air and gas properties, density corrections and their effect on fan performance
- Fan laws relating speed, flow, pressure and power and how to apply them
- Fan performance curves, system resistance curves and the operating point of a fan
- Fans in series and parallel and the problems caused by unstable operation
- Fan efficiency, best efficiency point and the energy cost of poor operation
- Practical exercise: using fan laws to predict performance after a speed change
Day2Fan and Blower Types
- Centrifugal fans with forward curved, backward curved, radial and airfoil blades
- Axial fans, adjustable and variable pitch blades and their use in cooling systems
- Forced draft and induced draft fans for furnaces and boilers and their special duties
- Positive displacement blowers such as lobe and screw blowers and their applications
- Multistage centrifugal and turbo blowers for aeration and process air supply
- Fan selection based on duty, gas conditions, noise and maintenance requirements
- Practical exercise: selecting fan types for a range of plant applications
Day3Flow Control and Energy Efficiency
- Outlet dampers, inlet dampers and inlet guide vanes and their effect on efficiency
- Variable speed drives and the large energy savings they can provide for fans
- Ductwork design, leaks and system effects that reduce fan performance
- Energy audits of fan systems and the identification of saving opportunities
- Control of furnace draft and combustion air using fans and dampers
- Noise from fans and methods to reduce it at the source and along the path
- Practical exercise: comparing energy use of damper control and variable speed control
Day4Mechanical Components, Vibration and Balancing
- Fan bearings, housings, lubrication methods and common bearing failure modes
- Belt drives, sheaves, tensioning and alignment and the use of direct couplings
- Vibration analysis for fans to detect unbalance, misalignment, looseness and structural resonance
- Field balancing of fan rotors using single plane and two plane methods
- Shaft alignment of fans and motors and the correction of soft foot
- Structural problems, foundations and the effect of weak supports on fan vibration
- Practical exercise: analysing fan vibration data and planning a field balance
Day5Inspection, Maintenance and Troubleshooting
- Erosion, corrosion and fouling of impellers and housings and how to protect them
- Inspection and overhaul procedures for fan impellers, shafts, bearings and dampers
- Safe isolation, lockout and rotation control before entering or working on fans
- Preventive and condition-based maintenance plans for critical fans and blowers
- Troubleshooting high vibration, low flow, overheating bearings and motor overloads
- Group exercise: troubleshooting a furnace induced draft fan with rising vibration
- Final assessment and discussion of fan issues at participants' own plants
Dates and fees
Fees are in GBP. per delegate.
Certificate
Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.
Frequently asked questions
Will I receive a certificate?
What is the difference between classroom and online?
Can you run this course for our company?
How do I register?
Related courses
Maintenance, Reliability & Asset IntegrityReliability-Centred Maintenance
15–19 March 2027 · Geneva +4 dates
Maintenance, Reliability & Asset IntegrityRotating Equipment: Pumps & Compressors
21–25 June 2027 · Barcelona +3 dates
Maintenance, Reliability & Asset Integrity