Interactive training course · 5 days

Columns and Process Vessels Maintenance

صيانة الأبراج وأوعية المعالجة

Next date
15–19 March 2027Madrid
Fees from
⁦£2,950⁩per delegate
Formats
Classroom · Online4 sessions
Duration
5 daysCertificate

Overview

Distillation columns, absorbers, strippers, reactors, drums and separators are among the largest and most important items of equipment in refineries, gas plants and petrochemical complexes. Their internals, such as trays, packing, distributors, demisters and baffles, determine separation efficiency and capacity, while the vessel shells, nozzles and supports must remain mechanically sound throughout years of service. Most of the maintenance work on these items is carried out during turnarounds, when time pressure is high, many contractors are on site and confined space, hot work and lifting risks are significant.

This course provides a practical understanding of the maintenance of columns and process vessels. Participants learn the functions and types of column internals, including trays, structured and random packing, liquid distributors and demisters, and the common causes of internal damage and fouling. The course covers turnaround planning for columns and vessels, safe preparation and entry, inspection of shells, nozzles, internals and supports, and installation and inspection of trays and packing to the required tolerances. It also explains cleaning methods, catalyst handling in reactors, corrosion and cracking repairs, quality control, documentation, start-up checks and troubleshooting of column performance after maintenance.

Objectives

  • Describe column internals and their role in separation performance
  • Identify common causes of internal damage, fouling and corrosion
  • Plan turnaround work on columns and process vessels effectively
  • Prepare vessels safely and control entry, hot work and lifting risks
  • Inspect shells, nozzles, internals and supports to required standards
  • Install and inspect trays, packing and distributors to correct tolerances
  • Apply quality control, start-up checks and post-maintenance troubleshooting

Who should attend

Maintenance and turnaround engineers, mechanical supervisors, inspectors, process engineers and contractors working on columns and vessels.

Training methodology

The course combines explanation of column internals and vessel integrity with real drawings, tray layouts, inspection checklists and turnaround plans. Participants review internals drawings, prepare inspection and installation checklists, plan a column turnaround with critical activities and safety controls, and assess photographs of damaged trays, packing and distributors. Tolerance checks for tray levelness, weir heights and distributor performance are practised. Case studies of poor column performance after turnarounds are analysed in groups to identify maintenance errors. Each day ends with a short quiz and discussion.

Programme outline

Day1Columns, Vessels and Their Internals
  • Functions of distillation columns, absorbers, strippers, drums and reactors in process plants
  • Tray types such as sieve, valve and bubble cap trays and their main components
  • Structured and random packing, support plates, hold-down grids and bed limiters
  • Liquid distributors, redistributors, collectors and their importance for packed columns
  • Demisters, vane packs, inlet devices and baffles in drums and separators
  • Reactor internals, catalyst beds, distributor trays and quench systems used in hydroprocessing reactors
  • Practical exercise: identifying internals and their functions on column drawings
Day2Damage Mechanisms and Turnaround Planning
  • Fouling, coking, corrosion and erosion of trays, packing and vessel internals
  • Mechanical damage from pressure surges, water slugs and incorrect start-ups
  • Corrosion and cracking of shells, nozzles and supports in different services
  • Turnaround scope definition, work packages and the planning of column activities
  • Scheduling, critical path, manpower and coordination with inspection and contractors
  • Materials, spare internals and the long lead items needed for column work
  • Practical exercise: preparing a turnaround plan for a crude distillation column
Day3Safe Preparation and Entry
  • Shutdown, draining, steaming, water washing and gas freeing of columns and vessels
  • Positive isolation, blinding lists and independent verification of isolations before any entry
  • Pyrophoric iron sulfide hazards and their control during opening of vessels
  • Confined space entry permits, gas testing, ventilation and rescue arrangements
  • Hot work, lifting and working at height inside and around tall columns
  • Managing many contractors and simultaneous activities safely during busy plant turnarounds
  • Practical exercise: reviewing a vessel entry and preparation plan for gaps and risks
Day4Inspection and Installation of Internals
  • Inspection of shells, nozzles, welds, linings and supports during turnarounds
  • Inspection of trays for damage, corrosion, loose parts and blocked openings
  • Tray installation tolerances: levelness, weir height, downcomer clearance and gaps
  • Packing installation, bed levelling, distributor levelling and water flow testing of distributors
  • Fastener control, gasket installation and the prevention of missing or loose hardware
  • Final inspection, cleanliness checks and formal sign-off before closing manways on vessels
  • Practical exercise: preparing a tray and packing installation inspection checklist
Day5Cleaning, Repairs and Post-Maintenance Performance
  • Cleaning methods, including hydroblasting, chemical cleaning and decoking of internals
  • Catalyst unloading and loading, dense loading and safety in reactor work
  • Repair of shells, nozzles and linings and the testing required after repair
  • Documentation, quality records and the formal handover from maintenance teams to operations
  • Start-up checks and troubleshooting of flooding, weeping and poor separation after maintenance
  • Group exercise: troubleshooting a column with poor separation after a turnaround
  • Final assessment and discussion of column maintenance issues at participants' plants

Dates and fees

15–19 March 2027March 2027
MadridSpain
Open
⁦£5,500⁩
19–23 April 2027April 2027
OnlineOnline
Open
⁦£2,950⁩
30 August – 3 September 2027August 2027
Kuwait CityKuwait
Open
⁦£4,450⁩
4–8 October 2027October 2027
RiyadhSaudi Arabia
Open
⁦£4,450⁩

Fees are in GBP. per delegate.

Certificate

Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.

Frequently asked questions

Will I receive a certificate?
Yes. Every delegate who attends the full programme receives a Harfard Technology certificate of completion.
What is the difference between classroom and online?
The content and trainer are the same. Classroom sessions run in a training venue in the chosen city; online sessions are live with the trainer over the internet.
Can you run this course for our company?
Yes. We deliver the course in-house at your premises or in a city you choose, adapting examples and exercises to your facilities.
How do I register?
Choose a date and click "Register", or send your request from the contact page. Our team will contact you to confirm your seat and send payment details.

Subscribe to our newsletter

New dates and featured courses, once a month.