Process Analysers and Sampling Systems
أجهزة التحليل وأنظمة أخذ العينات
- Next date
- 15–19 February 2027Singapore
- Fees from
- £2,950per delegate
- Formats
- Classroom · Online4 sessions
- Duration
- 5 daysCertificate
Overview
Process analysers provide the composition and quality measurements that control product specifications, protect equipment, ensure custody transfer accuracy and demonstrate environmental compliance. Gas chromatographs, moisture and oxygen analysers, H2S monitors, pH and conductivity meters and emissions analysers are found throughout oil, gas and petrochemical facilities. Yet analysers are often regarded as the least reliable instruments on site, and the cause is frequently the sampling system rather than the analyser itself. Poor sample conditioning, long lag times and contamination give results that operators cannot trust.
This course provides practical knowledge of process analysers and the sampling systems that feed them. Participants learn the principles, applications and limitations of the main analyser technologies, including gas chromatography, infrared and ultraviolet analysers, oxygen, moisture and sulphur analysers, and liquid quality measurements. The course covers sample system design, sample take-off, transport, conditioning, return and disposal, lag time calculation and analyser house design. It also explains calibration and validation practices, analyser reliability and availability, safety considerations for analyser houses, continuous emissions monitoring and the troubleshooting and maintenance of analyser systems.
Objectives
- Explain the role of process analysers in control, quality and compliance
- Describe the principles and limitations of the main analyser technologies
- Design sample take-off, transport, conditioning and return systems
- Calculate sample lag time and select suitable sample system components
- Apply calibration, validation and performance monitoring practices
- Describe analyser house design and associated safety requirements
- Troubleshoot and maintain analysers and sampling systems effectively
Who should attend
Analyser technicians, instrument engineers and technicians, laboratory staff, process engineers and environmental compliance staff.
Training methodology
The course combines technical presentations with practical exercises, equipment examples and case studies from refineries, gas plants and petrochemical units. Participants review analyser and sample system drawings, calculate lag times, select components for different sample types, interpret chromatograms and calibration records and diagnose common faults from symptoms and data. Case studies show how sampling problems led to off-specification products or compliance failures. Group work focuses on improving analyser reliability, and each day ends with a short quiz and discussion of participants' own analyser experiences.
Programme outline
Day1Role of Process Analysers
- Why process analysers matter for control, product quality, safety and environmental compliance
- Online, at-line and laboratory analysis and the strengths and weaknesses of each approach
- Analyser applications across production, gas processing, refining and petrochemical plants
- Key performance terms such as accuracy, repeatability, response time and detection limit
- Analyser system components from sample point through analyser to data output
- Why sampling problems cause most analyser failures and unreliable measurements in practice
- Practical exercise: reviewing an analyser list and identifying the purpose of each measurement
Day2Analyser Technologies
- Gas chromatography principles, columns, detectors and typical hydrocarbon applications in process plants
- Infrared, ultraviolet and laser based analysers and their typical measurement uses
- Oxygen analysers including paramagnetic, zirconia and electrochemical types and where each is used
- Moisture and dew point analysers for natural gas and hydrocarbon process streams
- Sulphur, H2S and total sulphur analysers for gas treating and fuel quality control
- Liquid analysers such as pH, conductivity, dissolved oxygen and oil-in-water monitors
- Practical exercise: selecting a suitable analyser technology for several process applications
Day3Sampling System Design
- Sample point location, probes and take-off designs that give a representative sample
- Sample transport lines, fast loops and the calculation of total system lag time
- Sample conditioning including filtering, pressure reduction, heating, cooling and phase separation
- Material selection, heat tracing and insulation for sample lines and conditioning panels
- Sample return, recovery and disposal options and their environmental implications
- Special challenges with wet gas, heavy liquids, corrosive streams and low concentrations
- Practical exercise: designing a sample system and calculating its lag time for a gas stream
Day4Calibration, Analyser Houses and Emissions Monitoring
- Calibration gases, standards and traceability for reliable analyser measurement results
- Validation methods, control charts and statistical checks of analyser performance
- Analyser house and shelter design, ventilation and gas detection requirements
- Hazardous area considerations, purging and the safe handling of calibration gases
- Continuous emissions monitoring systems and the regulatory requirements they support
- Data handling, analyser availability reporting and integration with plant control systems
- Practical exercise: interpreting calibration and validation records to judge analyser health
Day5Maintenance, Reliability and Troubleshooting
- Preventive maintenance programmes for analysers and their sample conditioning systems
- Measuring analyser availability and the key causes of poor reliability on site
- Troubleshooting slow response, drift, noisy readings and unexpected analyser values
- Diagnosing sample system problems such as blockages, leaks, condensation and contamination
- Building operator confidence in analysers and improving the way results are used
- Group exercise: diagnosing analyser system faults from symptoms, trends and drawings
- Final assessment and discussion of analyser improvement plans for participants' sites
Dates and fees
Fees are in GBP. per delegate.
Certificate
Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.
Frequently asked questions
Will I receive a certificate?
What is the difference between classroom and online?
Can you run this course for our company?
How do I register?
Related courses
Electrical, Instrumentation & ControlSafety Instrumented Systems (IEC 61511)
4–8 January 2027 · Madrid +4 dates
Electrical, Instrumentation & ControlProcess Control & Instrumentation
28 December 2026 – 1 January 2027 · Berlin +2 dates
Electrical, Instrumentation & Control