Power and Distribution Transformers
محولات القدرة والتوزيع
- Next date
- 4–8 January 2027Dubai
- Fees from
- £2,950per delegate
- Formats
- Classroom · Online4 sessions
- Duration
- 5 daysCertificate
Overview
Power and distribution transformers are among the most important and expensive assets in electrical networks serving oil, gas, petrochemical and power facilities. A transformer failure can shut down a whole plant or substation for weeks and may cause fires or explosions. Transformers age through thermal, electrical, mechanical and chemical stresses, and their condition can be monitored effectively through oil analysis, electrical tests and online monitoring. Engineers and technicians who understand transformer design and condition assessment can extend transformer life, plan maintenance wisely and avoid unexpected failures.
This course provides a practical understanding of the operation, testing and maintenance of power and distribution transformers. Participants learn transformer principles, construction, cooling methods, vector groups, tap changers, losses and efficiency, and the effects of loading and temperature on insulation life. The course covers transformer protection, accessories such as Buchholz relays, pressure relief devices and temperature indicators, and installation and commissioning. It also explains insulating oil properties and treatment, dissolved gas analysis, electrical tests such as insulation resistance, turns ratio, winding resistance, power factor and frequency response analysis, online monitoring, maintenance planning and fire protection.
Objectives
- Explain transformer principles, construction, cooling and vector groups
- Describe tap changers, losses, efficiency and the effects of loading
- Understand transformer protection and accessories and their functions
- Interpret insulating oil tests and dissolved gas analysis results
- Perform and interpret electrical diagnostic tests on transformers
- Apply online monitoring and condition assessment to plan maintenance
- Install, commission and protect transformers safely against fire
Who should attend
Electrical engineers, substation technicians, maintenance supervisors, testing and commissioning staff and asset managers.
Training methodology
The course combines explanation of transformer principles with real nameplates, test reports, oil analysis results and maintenance records. Participants calculate loading and losses, determine vector groups, interpret dissolved gas analysis using recognised methods, evaluate insulation resistance, turns ratio, winding resistance and power factor test results and prepare a condition-based maintenance plan. Photographs of failed transformers and internal components support learning. Case studies of transformer fires and failures are analysed in groups to identify warning signs that were missed. Each day ends with a short quiz and discussion.
Programme outline
Day1Transformer Principles and Construction
- The role of power and distribution transformers in industrial electrical networks
- Transformer operating principles, turns ratio, the magnetic circuit and the main types of losses
- Core and winding construction, insulation systems and the main tank components
- Cooling methods such as ONAN, ONAF and OFAF and their effect on ratings
- Vector groups, polarity and the requirements that must be met for parallel operation
- Dry-type and oil-immersed transformers and their typical applications in industrial plants
- Practical exercise: reading transformer nameplates and determining vector groups for several units
Day2Loading, Tap Changers, Protection and Accessories
- Loading guides, hot-spot temperature and the effect of temperature on insulation ageing
- Off-load and on-load tap changers, their operation and maintenance needs
- Transformer losses, efficiency and the economic loading of transformers in service
- Transformer protection: differential, overcurrent, restricted earth fault and gas protection
- Buchholz relays, pressure relief devices, oil level and temperature indicators
- Bushings, conservators, breathers and their routine inspection and maintenance requirements
- Practical exercise: calculating losses and assessing the effect of overloading on insulation life
Day3Insulating Oil and Dissolved Gas Analysis
- Functions of transformer oil and the properties that must be maintained
- Oil tests: breakdown voltage, moisture, acidity, interfacial tension and colour
- Oil sampling procedures and the importance of correct sampling for reliable results
- Dissolved gas analysis and the gases produced by different fault types
- Interpreting dissolved gas results using ratio methods and graphical techniques
- Oil treatment, filtration, degassing and reclamation and when to replace oil
- Practical exercise: interpreting a series of dissolved gas analysis reports
Day4Electrical Testing and Online Monitoring
- Insulation resistance and polarisation index tests on windings and bushings
- Turns ratio, winding resistance and excitation current tests and their interpretation
- Power factor and capacitance tests for transformer windings and bushings and their interpretation
- Frequency response analysis for detecting winding movement and core problems
- Online monitoring of dissolved gases, moisture, temperatures and bushing condition in service
- Condition assessment and health indices used for prioritising transformer maintenance and replacement
- Practical exercise: evaluating a set of transformer test results and recommending actions
Day5Installation, Maintenance and Fire Protection
- Transport, installation, drying and commissioning of new and refurbished transformers
- Preventive and condition-based maintenance plans for transformers of different sizes
- Transformer failure modes and the lessons learned from major transformer failures
- Fire risks, fire walls, oil containment and fire protection systems for transformers
- Safety precautions during transformer testing, oil sampling and other maintenance activities
- Group exercise: developing a condition-based maintenance plan for a fleet of transformers
- Final assessment and discussion of transformer issues at participants' own sites
Dates and fees
Fees are in GBP. per delegate.
Certificate
Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.
Frequently asked questions
Will I receive a certificate?
What is the difference between classroom and online?
Can you run this course for our company?
How do I register?
Related courses
Electrical, Instrumentation & ControlSafety Instrumented Systems (IEC 61511)
4–8 January 2027 · Madrid +4 dates
Electrical, Instrumentation & ControlProcess Control & Instrumentation
28 December 2026 – 1 January 2027 · Berlin +2 dates
Electrical, Instrumentation & Control