Instrument Calibration
- Next date
- 1–5 February 2027Muscat
- Fees from
- £2,950per delegate
- Formats
- Classroom · Online4 sessions
- Duration
- 5 daysCertificate
Overview
Instrument calibration ensures that the measurements used for control, safety, quality and custody transfer in industrial plants are accurate and trustworthy. Uncalibrated or poorly calibrated instruments can cause product giveaway, off-specification products, energy waste, spurious trips and, in the worst cases, failure of safety functions when they are needed. Calibration is also a requirement of quality management systems, regulators and customers. To be effective, calibration must be planned, performed with suitable and traceable equipment, documented properly and linked to the criticality of each instrument.
This course provides practical knowledge and skills in instrument calibration for oil, gas and process industries. Participants learn calibration terminology, accuracy, uncertainty, traceability and the hierarchy of standards, and how to calibrate pressure, differential pressure, temperature, level, flow and analytical instruments, control valves and positioners. The course covers calibration procedures, as-found and as-left data, test points, tolerances and adjustments, and the use of documenting calibrators and calibration management software. It also explains calibration intervals, risk-based calibration programmes, calibration of safety instrumented functions, laboratory and field calibration practices, records, audits and common calibration errors.
Objectives
- Explain calibration terminology, accuracy, uncertainty and traceability
- Prepare and follow calibration procedures with suitable test points and tolerances
- Calibrate pressure, temperature, level and flow instruments correctly
- Calibrate control valves, positioners and analytical instruments
- Use documenting calibrators and calibration management software effectively
- Set calibration intervals using risk-based and performance-based methods
- Maintain calibration records and pass audits with confidence
Who should attend
Instrument technicians, calibration technicians, instrument engineers, maintenance planners and quality assurance staff.
Training methodology
The course is hands-on and combines short explanations with practical calibration exercises using pressure, temperature and multifunction calibrators, transmitters and positioners where available. Participants prepare calibration procedures, perform five-point calibrations, record as-found and as-left data, calculate errors and decide whether adjustment is required. Uncertainty calculations and test accuracy ratios are practised with realistic examples. Calibration records and management software outputs are reviewed for audit readiness. Case studies show the consequences of poor calibration practices, and each day ends with a short quiz and discussion.
Programme outline
Day1Calibration Fundamentals
- Why calibration matters for control, safety, product quality and custody transfer
- Calibration terminology, including accuracy, precision, error, tolerance, span and measuring range
- Traceability, the hierarchy of standards and the role of accredited laboratories
- Measurement uncertainty and test accuracy ratios in practical calibration work
- As-found and as-left data, test points and the decision whether to adjust
- Calibration procedures, work instructions and the content of a good calibration record
- Practical exercise: calculating errors and test accuracy ratios from calibration data
Day2Pressure and Temperature Calibration
- Pressure calibration equipment: dead weight testers, pressure pumps and electronic calibrators
- Calibrating pressure gauges, switches and pressure transmitters step by step
- Calibrating differential pressure transmitters used for flow and level measurement in plants
- Temperature calibration equipment: dry blocks, liquid baths and reference thermometers
- Calibrating thermocouples, RTDs and temperature transmitters using sensor simulation and reference probes
- Common errors in pressure and temperature calibration and how to avoid them
- Practical exercise: performing a five-point calibration of a pressure transmitter
Day3Level, Flow and Analytical Calibration
- Calibrating differential pressure, displacer and radar level instruments in the workshop and field
- In-situ verification of level instruments and the use of manual dips and reference gauges
- Flow meter calibration, wet calibration on test rigs and electronic verification methods
- Calibration of gas detectors, oxygen analysers and other safety analysers
- Calibration of pH, conductivity and other liquid analysers used in plants
- Calibration gases, certified standards and the safe handling and storage of reference materials
- Practical exercise: preparing a calibration procedure for a radar level transmitter
Day4Control Valves, Smart Instruments and Calibrators
- Control valve stroke calibration, positioner setup and verification of the full valve travel
- Calibration of smart transmitters using HART and digital communication tools
- Documenting calibrators and the automatic recording and uploading of calibration results
- Calibration management software, asset databases and integration with maintenance work orders
- Field calibration versus workshop calibration and the safe isolation of instruments
- Calibration of instruments in hazardous areas and the use of certified equipment
- Practical exercise: calibrating a valve positioner and recording results with a documenting calibrator
Day5Calibration Programmes and Audits
- Setting calibration intervals using instrument criticality, drift history and the level of risk
- Proof testing and calibration requirements for instruments in safety instrumented functions
- Calibration of custody transfer meters and environmental monitoring instruments and their special rules
- Calibration records, certificates and preparation for internal and external audits
- Key performance indicators for calibration programmes and approaches to continuous improvement
- Group exercise: designing a risk-based calibration programme for a process unit
- Final assessment and discussion of calibration practices at participants' sites
Dates and fees
Fees are in GBP. per delegate.
Certificate
Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.
Frequently asked questions
Will I receive a certificate?
What is the difference between classroom and online?
Can you run this course for our company?
How do I register?
Related courses
Electrical, Instrumentation & ControlSafety Instrumented Systems (IEC 61511)
4–8 January 2027 · Madrid +4 dates
Electrical, Instrumentation & ControlProcess Control & Instrumentation
28 December 2026 – 1 January 2027 · Berlin +2 dates
Electrical, Instrumentation & Control