Industrial Networks and Data Communications
الشبكات الصناعية واتصالات البيانات
- Next date
- 8–12 March 2027Online
- Fees from
- £2,950per delegate
- Formats
- Online · Classroom4 sessions
- Duration
- 5 daysCertificate
Overview
Modern oil, gas and process facilities depend on industrial networks to move data between field instruments, controllers, safety systems, operator stations and business applications. Fieldbus, industrial Ethernet and wireless networks have replaced much traditional point-to-point wiring, bringing richer diagnostics and lower installation cost, but also new challenges in design, troubleshooting and cyber security. When a network fails or performs poorly, operators can lose visibility of the process, and diagnosing the cause requires a clear understanding of protocols, topologies and network equipment.
This course provides a practical introduction to industrial networks and data communications for process plants. Participants learn the fundamentals of data communication, the OSI model, serial communications such as RS-232 and RS-485, and the main industrial protocols including Modbus, HART, Foundation Fieldbus, Profibus and Profinet. The course covers industrial Ethernet, switches, routers, network topologies and redundancy, wireless instrumentation, and the integration of control, safety and business networks. It also explains network design principles, segmentation, industrial cyber security basics, commissioning and testing of networks, and systematic troubleshooting of communication faults using diagnostic tools and analysers.
Objectives
- Explain data communication fundamentals and the OSI reference model
- Describe serial communications and the Modbus and HART protocols
- Compare Foundation Fieldbus, Profibus and Profinet for process applications
- Design industrial Ethernet networks with suitable topology and redundancy
- Describe wireless instrumentation and its typical applications
- Apply network segmentation and basic industrial cyber security measures
- Troubleshoot communication faults using diagnostic tools and analysers
Who should attend
Instrument and control technicians, control system engineers, telecom and IT staff supporting plants, and maintenance supervisors.
Training methodology
The course combines clear explanation of communication principles with hands-on demonstrations and practical exercises. Participants configure simple Modbus and HART links, examine protocol frames with diagnostic software, compare network topologies, design a segmented plant network and analyse case studies of network failures and cyber incidents. Troubleshooting exercises use realistic fault scenarios such as wiring errors, address conflicts, termination problems and switch failures. Group discussions link the material to the systems used at participants' own plants, and each day ends with a short quiz and review.
Programme outline
Day1Data Communication Fundamentals
- Why industrial networks are used and how they changed instrumentation and control design
- Data communication basics: bits, bytes, baud rate, bandwidth and error detection methods
- The OSI reference model and how industrial protocols map to its seven layers
- Serial communications with RS-232 and RS-485 and their wiring and distance limits
- Cabling, shielding, grounding and termination practices for reliable industrial communication
- Network topologies such as star, ring, bus and tree and their typical uses in plants
- Practical exercise: identifying communication layers and cabling issues in a plant example
Day2Modbus, HART and Fieldbus Protocols
- Modbus RTU and Modbus TCP, register maps and typical master and slave arrangements
- The HART protocol, smart transmitters and the use of handheld communicators for configuration
- Foundation Fieldbus H1 segments, function blocks and control in the field concept
- Profibus DP and PA and their use with drives, valves and process instruments
- Segment design, power supplies, spurs and device count limits for fieldbus networks
- Comparing protocols for cost, diagnostics, speed and suitability in hazardous areas
- Practical exercise: configuring a Modbus link and reading HART device diagnostics
Day3Industrial Ethernet and Wireless Networks
- Industrial Ethernet, Profinet and EtherNet/IP and their role in modern control systems
- Managed switches, VLANs, routers and firewalls used in plant network infrastructure
- Ring topologies and redundancy protocols that keep control networks available during failures
- Wireless instrumentation standards such as WirelessHART and ISA100 and their applications
- Planning wireless networks, gateways, battery life and coverage in congested process areas
- Fibre optic and copper media selection for long distances and noisy electrical environments
- Practical exercise: designing a redundant Ethernet network for a process unit
Day4Network Integration and Cyber Security
- Integrating control, safety, power management and business networks within a plant
- The layered network model for industrial sites and the role of demilitarised zones
- Network segmentation, zones and conduits and their importance for operational technology security
- Common cyber threats to industrial control systems and lessons from real incidents
- Basic security measures including access control, patch management, backups and monitoring
- Remote access to plant networks and the controls needed to keep it secure
- Practical exercise: reviewing a plant network diagram and proposing security improvements
Day5Commissioning, Testing and Troubleshooting
- Commissioning and testing industrial networks before handing them over to operations
- Network documentation, addressing schemes and the importance of keeping records up to date
- Diagnostic tools such as protocol analysers, cable testers and switch management software
- Troubleshooting common faults such as wiring errors, address conflicts and termination problems
- Monitoring network health and planning maintenance for communication systems in plants
- Group exercise: diagnosing a series of realistic network failures from symptoms and data
- Final assessment and discussion of network issues at participants' own facilities
Dates and fees
Fees are in GBP. per delegate.
Certificate
Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.
Frequently asked questions
Will I receive a certificate?
What is the difference between classroom and online?
Can you run this course for our company?
How do I register?
Related courses
Electrical, Instrumentation & ControlSafety Instrumented Systems (IEC 61511)
4–8 January 2027 · Madrid +4 dates
Electrical, Instrumentation & ControlProcess Control & Instrumentation
28 December 2026 – 1 January 2027 · Berlin +2 dates
Electrical, Instrumentation & Control