Gas Insulated Switchgear (GIS) and SF6 Handling
لوحات المفاتيح المعزولة بالغاز (GIS) والتعامل مع غاز SF6
- Next date
- 25–29 January 2027Doha
- Fees from
- £2,950per delegate
- Formats
- Classroom · Online4 sessions
- Duration
- 5 daysCertificate
Overview
Gas insulated switchgear is widely used in high voltage substations serving oil, gas, petrochemical and power facilities, especially where space is limited, environmental conditions are harsh or high reliability is required. GIS uses sulfur hexafluoride gas as an insulating and arc-quenching medium inside sealed metal enclosures. While GIS is compact and reliable, it requires specialist knowledge for operation, testing and maintenance. SF6 is also a very potent greenhouse gas, and its decomposition products after arcing can be toxic, so careful handling, leak control and recovery are essential for safety and environmental compliance.
This course provides a practical understanding of gas insulated switchgear and the safe handling of SF6 gas. Participants learn GIS design principles, components such as circuit breakers, disconnectors, earthing switches, busbars, instrument transformers and cable terminations, and the advantages and limitations of GIS compared with air-insulated substations. The course covers SF6 properties, gas density monitoring, leak detection and quantification, gas quality testing, recovery, filling and recycling, and the hazards of decomposition products. It also explains GIS operation and interlocking, partial discharge monitoring, inspection and maintenance, high voltage testing, failure investigation, environmental regulations and alternatives to SF6.
Objectives
- Explain GIS design principles and compare GIS with air-insulated substations
- Describe GIS components, including breakers, disconnectors and earthing switches
- Understand SF6 properties, density monitoring and gas quality requirements
- Detect and quantify SF6 leaks and apply recovery and recycling procedures
- Handle SF6 and its decomposition products safely with suitable PPE
- Operate GIS safely and apply inspection, testing and maintenance practices
- Comply with environmental rules and understand alternatives to SF6
Who should attend
Electrical engineers, substation technicians, high voltage maintenance staff, testing and commissioning engineers and HSE personnel in substations.
Training methodology
The course combines explanation of GIS technology with real substation layouts, single-line diagrams, gas zone drawings, test reports and maintenance procedures. Participants identify gas compartments and components, interpret density monitor readings and alarm settings, calculate leak rates and annual emissions, review gas handling procedures, and interpret partial discharge and gas quality test results. Demonstrations of leak detectors and gas handling equipment are included where available. Case studies of GIS failures and SF6 incidents are analysed in groups. Each day ends with a short quiz and discussion of GIS issues at participants' substations.
Programme outline
Day1GIS Technology and Design
- Applications of gas insulated switchgear in industrial and utility substations
- Advantages and limitations of GIS compared with conventional air-insulated substations in industry
- GIS design principles, metal enclosures, insulators and the arrangement of gas compartments
- Circuit breakers, disconnectors and earthing switches installed inside GIS bays and their functions
- Busbars, instrument transformers, surge arresters and cable and transformer connections
- Single-phase and three-phase enclosed designs and indoor and outdoor installations
- Practical exercise: identifying GIS components and gas zones on substation drawings
Day2SF6 Properties and Gas Monitoring
- Properties of SF6 and why it is used for insulation and arc quenching
- Gas density, pressure and temperature relationships and the use of density monitors
- Alarm and lockout levels and the consequences of low gas density in service
- SF6 quality requirements for moisture, purity and the level of decomposition products
- Gas quality testing equipment and the interpretation of test results
- Decomposition products formed by arcing and partial discharge and their toxicity
- Practical exercise: interpreting density readings and gas quality test results
Day3SF6 Handling, Leak Control and Environment
- Safe handling of SF6 cylinders, gas carts and recovery and filling equipment
- Evacuation, filling and topping up procedures for GIS gas compartments
- Leak detection methods, including sniffers, cameras and pressure trend analysis
- Calculating leak rates and annual emissions and meeting the related reporting requirements
- Personal protective equipment and safety precautions when opening arced compartments
- Environmental regulations, greenhouse gas impact and the reduction of SF6 emissions
- Practical exercise: calculating leak rates and planning a gas recovery and refill operation
Day4Operation, Testing and Maintenance
- Switching operations, interlocks and safe operating practices in GIS substations
- Partial discharge monitoring using UHF and acoustic methods and interpretation of results
- Inspection routines and condition monitoring of GIS bays and mechanisms
- Maintenance of circuit breaker operating mechanisms, drives and GIS auxiliary systems
- High voltage testing during commissioning and after maintenance or repairs
- Outage planning, compartment opening and quality control during GIS maintenance
- Practical exercise: interpreting partial discharge monitoring data from a GIS substation
Day5Failures, Investigation and Future Trends
- Common GIS failure modes, including insulator flashover, particles and mechanism faults
- Investigation of GIS failures and the evidence collected after an internal fault
- Repair options, spare parts strategy and the role of the manufacturer
- Alternatives to SF6 and the development of new gas mixtures and vacuum technologies
- Asset management, condition assessment and life extension of ageing GIS installations
- Group exercise: planning the response to a GIS internal fault and gas release
- Final assessment and discussion of GIS issues at participants' own substations
Dates and fees
Fees are in GBP. per delegate.
Certificate
Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.
Frequently asked questions
Will I receive a certificate?
What is the difference between classroom and online?
Can you run this course for our company?
How do I register?
Related courses
Electrical, Instrumentation & ControlSafety Instrumented Systems (IEC 61511)
4–8 January 2027 · Madrid +4 dates
Electrical, Instrumentation & ControlProcess Control & Instrumentation
28 December 2026 – 1 January 2027 · Berlin +2 dates
Electrical, Instrumentation & Control