Interactive training course · 5 days

Fibre Optic Technology and Network Planning

Next date
1–5 March 2027Dammam
Fees from
⁦£2,950⁩per delegate
Formats
Classroom · Online4 sessions
Duration
5 daysCertificate

Overview

Fibre optic networks carry control, safety, telecommunication, CCTV and business data across oil, gas and energy facilities, linking control rooms, remote wellsites, offshore platforms, pipelines and substations. Their high bandwidth, immunity to electrical interference and suitability for long distances make them the preferred medium for modern industrial communications. However, poor planning, incorrect installation, dirty connectors and bad splicing are common causes of network outages, and many technicians lack the skills needed to test fibre links and locate faults efficiently.

This course provides a practical understanding of fibre optic technology and the planning of fibre networks for industrial sites. Participants learn the principles of light transmission in optical fibre, single mode and multimode fibres, cable construction and selection for indoor, outdoor, buried and aerial routes, and connectors, splicing and termination methods. The course covers optical power budgets, transmitters, receivers and transceivers, wavelength division multiplexing, and network topologies and redundancy. It also explains route planning, installation practices, testing with light sources, power meters and OTDRs, documentation, and the maintenance and troubleshooting of fibre optic networks in industrial environments.

Objectives

  • Explain how light is transmitted in single mode and multimode fibres
  • Select fibre cables for indoor, outdoor, buried and aerial installations
  • Describe connectors, fusion and mechanical splicing and termination methods
  • Calculate optical power budgets for industrial fibre links
  • Plan fibre routes, topologies and redundancy for industrial networks
  • Test fibre links using power meters and OTDRs and interpret the results
  • Maintain fibre networks and locate and repair common faults

Who should attend

Telecom and network technicians, instrument and electrical technicians, telecom engineers and project staff installing fibre networks.

Training methodology

The course combines technical sessions with hands-on demonstrations and practical exercises. Participants examine fibre cables and connectors, observe cleaning, inspection and splicing techniques, calculate power budgets, plan fibre routes for a facility and interpret OTDR traces showing splices, connectors, bends and breaks. Case studies review network outages caused by poor installation and damaged cables. Group work focuses on planning a resilient fibre network for a plant or pipeline. Each day ends with a short quiz and discussion of participants' fibre network issues.

Programme outline

Day1Fibre Optic Principles
  • Why fibre optics are used in oil, gas and energy facilities instead of copper cables
  • Light transmission, total internal reflection, core, cladding and numerical aperture
  • Single mode and multimode fibres, their characteristics and typical applications
  • Attenuation, dispersion and bandwidth and the factors that limit transmission distance
  • Operating wavelengths and the effect of bends and microbends on signal loss
  • Optical fibre standards and the classification of fibre types used in industry
  • Practical exercise: selecting a fibre type for several industrial communication links
Day2Cables, Connectors and Splicing
  • Fibre cable construction including loose tube, tight buffer and armoured designs
  • Selecting cables for indoor, outdoor, duct, direct buried and aerial installations
  • Connector types, polish styles and the importance of cleaning and inspection
  • Fusion splicing equipment, techniques and typical splice loss values achieved in field conditions
  • Mechanical splicing and field termination methods, their typical uses and their main limitations
  • Splice closures, patch panels and fibre management for reliable installations
  • Practical exercise: inspecting connectors and reviewing splicing and termination steps
Day3Transmission Equipment and Power Budgets
  • Light sources, lasers, LEDs and detectors used in fibre transmission equipment
  • Transceivers, media converters and SFP modules used with industrial switches
  • Wavelength division multiplexing and its use to increase fibre capacity
  • Optical power budget calculation including fibre, splice and connector losses
  • System margins, ageing allowances and the impact of future repairs on link budgets
  • Fibre network topologies, ring designs and route diversity for high availability
  • Practical exercise: calculating a power budget for a long pipeline fibre link
Day4Network Planning and Installation
  • Planning fibre routes across plants, pipelines and offshore facilities with protection from damage
  • Fibre count planning, spare capacity and allocation to control, safety and business systems
  • Installation practices for pulling, bend radius, tension limits and cable protection
  • Installation in hazardous areas, cable trays, ducts and subsea or riser environments
  • Labelling, documentation and records needed for long-term management of the fibre network
  • Project quality control, inspection points and acceptance criteria for fibre works
  • Practical exercise: preparing a fibre network plan for a process facility
Day5Testing, Maintenance and Troubleshooting
  • Testing with light sources and power meters and the standard test methods used
  • OTDR principles and interpreting traces with splices, connectors, bends and breaks
  • Acceptance testing, test reports and comparison with design power budgets
  • Preventive maintenance, inspection routines and connector cleaning programmes for operating networks
  • Locating and repairing fibre faults and restoring service quickly after damage
  • Group exercise: interpreting OTDR traces and diagnosing faults on several links
  • Final assessment and discussion of fibre network practices at participants' sites

Dates and fees

1–5 March 2027March 2027
DammamSaudi Arabia
Open
⁦£4,450⁩
7–11 June 2027June 2027
OnlineOnline
Open
⁦£2,950⁩
2–6 August 2027August 2027
BerlinGermany
Open
⁦£5,750⁩
6–10 December 2027December 2027
MuscatOman
Open
⁦£4,450⁩

Fees are in GBP. per delegate.

Certificate

Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.

Frequently asked questions

Will I receive a certificate?
Yes. Every delegate who attends the full programme receives a Harfard Technology certificate of completion.
What is the difference between classroom and online?
The content and trainer are the same. Classroom sessions run in a training venue in the chosen city; online sessions are live with the trainer over the internet.
Can you run this course for our company?
Yes. We deliver the course in-house at your premises or in a city you choose, adapting examples and exercises to your facilities.
How do I register?
Choose a date and click "Register", or send your request from the contact page. Our team will contact you to confirm your seat and send payment details.

Subscribe to our newsletter

New dates and featured courses, once a month.