Electrical Safety and Arc Flash
السلامة الكهربائية ومخاطر القوس الكهربائي
- Next date
- 15–19 March 2027Kuwait City
- Fees from
- £2,950per delegate
- Formats
- Classroom · Online4 sessions
- Duration
- 5 daysCertificate
Overview
Electrical work in oil, gas, petrochemical and power facilities exposes electricians, engineers and operators to electric shock, arc flash, arc blast and fire hazards. Arc flash incidents can release enormous energy in a fraction of a second, causing severe burns, hearing damage and fatal injuries, and they often happen during routine switching, racking of breakers or work on equipment believed to be dead. Effective electrical safety depends on sound engineering, accurate arc flash studies, safe work practices, correct protective equipment and a strong culture of isolation and verification.
This course provides practical knowledge of electrical safety and arc flash hazard management for industrial facilities. Participants learn the effects of electric current on the body, shock and arc flash hazards, and the principles of recognised electrical safety standards. The course covers electrical safety programmes, approach boundaries, energised work justification, permits, lockout tagout and the establishment of an electrically safe work condition. It also explains arc flash risk assessment and incident energy studies, labelling, selection of arc-rated personal protective equipment, engineering controls, safe switching and racking, testing for absence of voltage, and incident response and investigation.
Objectives
- Explain the effects of electric current and the hazards of shock and arc flash
- Apply the principles of recognised electrical safety standards at work
- Establish an electrically safe work condition using isolation and verification
- Apply approach boundaries, energised work permits and safe work practices
- Interpret arc flash studies, labels and incident energy values
- Select arc-rated PPE and engineering controls that reduce arc flash risk
- Respond to electrical incidents and investigate their causes effectively
Who should attend
Electrical engineers, electricians, electrical supervisors, operators who perform switching, HSE professionals and permit issuers.
Training methodology
The course combines explanation of electrical hazards and standards with practical exercises using real single-line diagrams, arc flash labels, study reports, permits and lockout tagout procedures. Participants determine approach boundaries, interpret incident energy values, select arc-rated protective equipment, prepare isolation plans and practise the steps of testing for absence of voltage. Videos of arc flash events and case studies of electrical incidents are analysed in groups to identify failures in planning, isolation and protective equipment. Each day ends with a short quiz and discussion of electrical safety practices at participants' sites.
Programme outline
Day1Electrical Hazards and Their Effects
- Electrical hazards in industrial facilities and the statistics of electrical injuries
- Effects of electric current on the human body and the factors that affect injury severity
- Electric shock, step and touch potential and the role of earthing in protection
- Arc flash and arc blast: causes, temperatures, pressure waves and typical injuries
- Common tasks that lead to arc flash incidents, including switching and racking breakers
- Static electricity and other electrical ignition sources in hazardous areas of process plants
- Practical exercise: identifying electrical hazards for a range of common maintenance tasks
Day2Electrical Safety Programmes and Standards
- Principles of recognised electrical safety standards and their application in industry
- Elements of an electrical safety programme, including roles, training and audits
- Qualified and unqualified persons and the competence required for electrical work
- Shock protection approach boundaries, including the limited and the restricted approach boundaries
- Justification for energised work and the content of an energised work permit
- Job planning, briefings and risk assessment before any electrical task
- Practical exercise: determining approach boundaries and preparing an energised work permit
Day3Electrically Safe Work Condition
- The steps required to establish an electrically safe work condition
- Isolation points, lockout tagout devices and personal and group locking systems
- Testing for absence of voltage with correctly rated and verified test instruments
- Temporary protective earthing and its correct application, verification and removal after work
- Stored energy in capacitors, cables and motors and how to discharge it safely
- Restoring equipment to service safely after the work is completed
- Practical exercise: preparing an isolation plan using a single-line diagram
Day4Arc Flash Risk Assessment and PPE
- Arc flash risk assessment methods and when a detailed study is required
- Incident energy studies, input data, protective device settings and study results
- Arc flash boundary and arc flash labels and how to interpret them correctly
- Arc-rated clothing, face shields, gloves and hearing protection and their selection
- Engineering controls such as arc-resistant switchgear, remote racking devices and maintenance switches
- Reducing arc flash energy through protection settings, zone selective interlocking and design
- Practical exercise: interpreting arc flash labels and selecting the correct PPE category
Day5Safe Practices, Incident Response and Investigation
- Safe switching practices, operating sequences and the use of switching programmes
- Work on batteries, UPS systems, variable speed drives and other special equipment
- Electrical work in hazardous areas and coordination with permit to work systems
- First aid and emergency response to electric shock and arc flash injuries
- Investigation of electrical incidents and lessons learned from serious events
- Group exercise: investigating an arc flash incident and identifying the failed barriers
- Final assessment and discussion of electrical safety at participants' own sites
Dates and fees
Fees are in GBP. per delegate.
Certificate
Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.
Frequently asked questions
Will I receive a certificate?
What is the difference between classroom and online?
Can you run this course for our company?
How do I register?
Related courses
Electrical, Instrumentation & ControlSafety Instrumented Systems (IEC 61511)
4–8 January 2027 · Madrid +4 dates
Electrical, Instrumentation & ControlProcess Control & Instrumentation
28 December 2026 – 1 January 2027 · Berlin +2 dates
Electrical, Instrumentation & Control