Electrical Heat Tracing
- Next date
- 29 March – 2 April 2027Online
- Fees from
- £2,950per delegate
- Formats
- Online · Classroom4 sessions
- Duration
- 5 daysCertificate
Overview
Electrical heat tracing keeps process lines, instruments and equipment at the right temperature to prevent freezing, maintain fluid viscosity, avoid condensation and protect product quality. In oil, gas and petrochemical plants, heat tracing is used on water lines, heavy oil and sulphur lines, instrument impulse lines and analyser sample systems, often in hazardous areas. Poorly designed or maintained tracing leads to frozen lines, blocked instruments, wasted energy and, in hazardous areas, potential ignition risks. Many failures result from damaged insulation, wrong cable selection or inadequate monitoring.
This course provides a practical understanding of the design, installation, testing and maintenance of electrical heat tracing systems. Participants learn heat loss calculations, the types of heating cables including self-regulating, power-limiting, constant wattage and mineral insulated cables, and the selection of cables for different applications and temperature classes. The course covers thermal insulation, control and monitoring methods, power distribution and protection, and the requirements of relevant international standards for hazardous areas. It also explains installation practices, commissioning tests, insulation resistance testing, energy efficiency, and the systematic troubleshooting of common heat tracing faults.
Objectives
- Explain the purposes and typical applications of electrical heat tracing
- Calculate heat loss from pipes, vessels and instrument lines
- Select heating cables for different applications and temperature classes
- Specify control, monitoring, power distribution and protection arrangements
- Apply standards for heat tracing in hazardous areas
- Install, test and commission heat tracing circuits correctly
- Maintain heat tracing systems and troubleshoot common faults
Who should attend
Electrical and instrument technicians, electrical engineers, maintenance supervisors and project engineers responsible for heat tracing.
Training methodology
The course is practical and application focused, combining technical sessions with calculations, product examples and case studies. Participants calculate heat loss for typical pipes and instrument lines, select cables using manufacturer data, design simple control and power arrangements, review heat tracing isometrics and interpret insulation resistance and commissioning records. Case studies examine frozen lines, burnt cables and hazardous area non-conformities. Troubleshooting exercises use realistic fault scenarios, and each day ends with a short quiz and discussion of participants' own heat tracing issues.
Programme outline
Day1Heat Tracing Purposes and Heat Loss
- Why heat tracing is needed: freeze protection, process temperature maintenance and condensation control
- Typical applications on water, heavy oil, sulphur, instrument and analyser sample lines
- Comparison of electrical heat tracing with steam tracing and other heating methods
- Heat transfer basics and the factors that affect heat loss from pipes and equipment
- Heat loss calculations for pipes, valves, flanges, supports, vessels and instrument enclosures
- Design inputs such as ambient temperature, wind speed, insulation type and safety factors
- Practical exercise: calculating heat loss and required heating for a typical process line
Day2Heating Cables and Selection
- Self-regulating heating cables, their construction and how their output changes with temperature
- Power-limiting and constant wattage cables and where each type is most suitable
- Mineral insulated cables for high temperature and high power density applications
- Series and parallel circuits, maximum circuit lengths and start-up current considerations
- Temperature classification, sheath temperature limits and cable selection in hazardous areas
- Thermal insulation materials, weatherproofing and the effect of wet or damaged insulation
- Practical exercise: selecting cables and circuit lengths using manufacturer design data
Day3Control, Monitoring and Power Distribution
- Control methods including ambient sensing, line sensing and proportional control strategies
- Thermostats, electronic controllers and the placement of temperature sensors on lines
- Heat tracing panels, distribution boards and circuit protection arrangements for tracing systems
- Earth leakage protection and its importance for personnel and equipment safety
- Remote monitoring and alarm systems for heat tracing integrated with plant control
- Energy efficiency through control strategies, insulation quality and system optimisation
- Practical exercise: designing a control and power arrangement for a group of tracing circuits
Day4Standards, Installation and Commissioning
- International standards for electrical heat tracing in safe and hazardous area applications
- Certification requirements and documentation for heat tracing in explosive atmospheres
- Installation practices for cables, connection kits, end seals and fixing methods
- Tracing valves, pumps, instruments and complex shapes using correct allowances
- Insulation resistance testing, continuity checks and commissioning test procedures before energising circuits
- Heat tracing isometrics, circuit schedules and as-built documentation for handover
- Practical exercise: reviewing an installation against a checklist and identifying non-conformities
Day5Maintenance and Troubleshooting
- Preventive maintenance and periodic inspection of heat tracing systems before winter
- Interpreting insulation resistance and current readings to assess circuit condition
- Common faults such as moisture ingress, damaged cables, failed controllers and tripped breakers
- Systematic troubleshooting methods to locate faults along long tracing circuits
- Lessons learned from frozen lines, overheating incidents and hazardous area failures
- Group exercise: diagnosing heat tracing faults from site data and symptoms
- Final assessment and discussion of heat tracing improvements at participants' plants
Dates and fees
Fees are in GBP. per delegate.
Certificate
Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.
Frequently asked questions
Will I receive a certificate?
What is the difference between classroom and online?
Can you run this course for our company?
How do I register?
Related courses
Electrical, Instrumentation & ControlSafety Instrumented Systems (IEC 61511)
4–8 January 2027 · Madrid +4 dates
Electrical, Instrumentation & ControlProcess Control & Instrumentation
28 December 2026 – 1 January 2027 · Berlin +2 dates
Electrical, Instrumentation & Control