Interactive training course · 5 days

Electrical and Fibre Optic Cables

الكابلات الكهربائية وكابلات الألياف البصرية

Next date
22–26 February 2027Muscat
Fees from
⁦£2,950⁩per delegate
Formats
Classroom · Online4 sessions
Duration
5 daysCertificate

Overview

Cables carry power, control signals and data to every part of an oil, gas or industrial facility, and cable failures can cause plant trips, loss of control, fires and long outages. Power cables must be correctly sized for current, voltage drop and short circuit duty, while control, instrument and fibre optic cables must provide reliable signals in environments with heat, moisture, chemicals, vibration and electromagnetic interference. Poor installation, damaged insulation, bad terminations and inadequate joints are among the most common causes of cable faults and many of them can be prevented through good practice.

This course provides a practical understanding of electrical and fibre optic cables used in industrial facilities. Participants learn cable construction, insulation and sheath materials, voltage ratings and the main types of low, medium and high voltage power cables, control and instrument cables and fire-resistant cables. The course covers cable sizing for current, voltage drop and short circuit, cable routing, trays and installation practices, glands and hazardous area requirements, terminations and joints. It also explains fibre optic principles, cable types, splicing and connectors, testing of power cables and fibre links, cable fault location, condition assessment and maintenance.

Objectives

  • Describe cable construction, insulation materials and voltage ratings
  • Compare power, control, instrument and fire-resistant cable types
  • Size power cables for current, voltage drop and short circuit duty
  • Apply correct routing, installation, glanding and hazardous area practices
  • Make and inspect terminations and joints for low and medium voltage cables
  • Explain fibre optic principles, splicing, connectors and link testing
  • Test cables, locate faults and assess cable condition for maintenance

Who should attend

Electrical and instrument engineers and technicians, cable jointers, telecom staff, maintenance supervisors and project engineers.

Training methodology

The course combines explanation of cable principles with real cable data sheets, cable schedules, routing drawings and test reports. Participants size cables using derating factors, check voltage drop and short circuit withstand, review installation details for trays, glands and hazardous areas, and interpret insulation resistance, VLF, partial discharge and OTDR test results. Cable samples, terminations and joints are examined to identify good and poor workmanship where available. Case studies of cable fires and failures are analysed in groups. Each day ends with a short quiz and discussion of cable issues at participants' sites.

Programme outline

Day1Cable Construction and Types
  • The role of cables in industrial facilities and the consequences of cable failures
  • Cable construction, including conductors, insulation, screens, armour and outer protective sheaths
  • Insulation materials such as PVC, XLPE and EPR and their temperature and voltage limits
  • Low, medium and high voltage power cables and their typical applications
  • Control, instrument and data cables, screening and protection against interference
  • Fire-resistant, flame-retardant and low smoke halogen-free cables and their uses
  • Practical exercise: identifying cable types and constructions from data sheets and samples
Day2Cable Sizing and Selection
  • Current-carrying capacity and the derating factors applied for different installation conditions
  • Voltage drop calculations and their importance for motor starting and long runs
  • Short circuit withstand and the sizing of conductors and screens for fault duty
  • Cable selection for hazardous areas, offshore, buried and high temperature locations
  • Cable schedules, numbering and documentation used on projects and in maintenance
  • Economic sizing and the energy losses associated with undersized cables
  • Practical exercise: sizing power cables using derating, voltage drop and short circuit checks
Day3Installation, Glands, Terminations and Joints
  • Cable routing, segregation, trays, ladders, conduits and the installation of cables underground
  • Pulling tensions, bending radii and the prevention of damage during installation
  • Cable glands, sealing and the requirements for glands in hazardous areas
  • Low voltage terminations, cable lugs, crimping tools and good termination practice on site
  • Medium voltage terminations and joints, stress control and the importance of cleanliness
  • Fire stopping, cable penetrations and protection of cables against mechanical damage
  • Practical exercise: reviewing installation details and identifying poor workmanship from photographs
Day4Fibre Optic Cables
  • Principles of light transmission in optical fibres and the advantages of fibre for data
  • Single-mode and multimode fibres and their uses in industrial networks
  • Fibre optic cable constructions for indoor, outdoor, buried and offshore use
  • Fusion and mechanical splicing, fibre connectors and the use of patch panels in networks
  • Loss budgets, attenuation and the planning of fibre optic links
  • Fibre testing with light sources, power meters and OTDR equipment
  • Practical exercise: preparing a loss budget and interpreting an OTDR trace
Day5Testing, Fault Location and Maintenance
  • Insulation resistance and polarisation index testing for low and medium voltage cables
  • Withstand testing, VLF testing and partial discharge testing of medium voltage cables
  • Cable fault location methods, including time domain reflectometry and surge techniques
  • Condition assessment, ageing mechanisms and the planning of cable replacement
  • Safety during cable testing and work on cables near live equipment
  • Group exercise: troubleshooting a medium voltage cable failure from test data
  • Final assessment and discussion of cable issues at participants' own sites

Dates and fees

22–26 February 2027February 2027
MuscatOman
Open
⁦£4,450⁩
3–7 May 2027May 2027
OnlineOnline
Open
⁦£2,950⁩
12–16 July 2027July 2027
GenevaSwitzerland
Open
⁦£6,250⁩
25–29 October 2027October 2027
DammamSaudi Arabia
Open
⁦£4,450⁩

Fees are in GBP. per delegate.

Certificate

Every delegate who attends the full programme receives a Harfard Technology certificate of completion stating the course title, duration, dates and venue.

Frequently asked questions

Will I receive a certificate?
Yes. Every delegate who attends the full programme receives a Harfard Technology certificate of completion.
What is the difference between classroom and online?
The content and trainer are the same. Classroom sessions run in a training venue in the chosen city; online sessions are live with the trainer over the internet.
Can you run this course for our company?
Yes. We deliver the course in-house at your premises or in a city you choose, adapting examples and exercises to your facilities.
How do I register?
Choose a date and click "Register", or send your request from the contact page. Our team will contact you to confirm your seat and send payment details.

Subscribe to our newsletter

New dates and featured courses, once a month.